You can get all this stuff at Pep boys or autozone...

1 Coupler (The blue thing)
1 intake tube (Mine was Spectre)
2 Cone filters of your choice (make sure they fit 3'')
1 Spectre intake duct (Make sure its metal)(3'') ****NOTE: You will have to manipulate it so you can bolt on the throttle from the air box with a drill. Make sure you have Epoxy to cover any holes (it wont be perfect but it will work if you do it correctly, a friend did it for me.)
1 Spectre/Stainless steel clamp-on cotton fiber oil breather element (For the EGR tube, the small tube. You may need a clamp if you dont have one.)

My friend fabricated a heat shield. I recommend attempting to do the same so you aren't sucking up hot air.

Hope this helps you out, you are looking at around 50$ w/o the heat shield fabricated. If you need help, lemme know, Ill try n get a video made for you tomorrow.