Results 1 to 5 of 5

Thread: Replacing the alternator

  1. #1

    Replacing the alternator

    W202
    1994 c280


    The original alternator just gave up the ghost today, so I need to order one and install it.

    If anybody has done this job I'd appreciate the input. Also what they may recommend for an aftermarket alternator.

    Thanks.

  2. #2
    Senior Member
    Join Date
    Feb 2013
    Location
    biglerville pa
    Posts
    783
    factory always is the easiest(try napa or autozone ) but at most its a 4-5 tool job there usualy easy to replace
    first unplug battery
    2 un plug all connections to the alternator
    3loosen the belt tension however your model is set up (don't take the belt off completely just need to slip it off the alternator pully )
    4 unbolt the 2-3 bolts holding the alternator
    reverse instructions to install new
    hopefully your alternator is a top mount it makes it all the easier lol watch any alternator replacement vid on youtube its virtually the same for all cars

  3. #3
    Thanks man, much appreciated.

    I just replaced that belt last month and was praying that tensioner would not break. I know they are prone to going bad. This one is about three years old, so hopefully no issue when I loosen it up.

  4. #4
    Senior Member
    Join Date
    Feb 2013
    Location
    biglerville pa
    Posts
    783
    psh dnt worry mine hasent been replaced lol still has tension XD

  5. #5
    Senior Member
    Join Date
    Sep 2012
    Location
    los angeles
    Posts
    114
    its an easy install I own an alternator rebuild shop. That year came with either a valeo or bosh unit, a fair price would be $120 for a rebuild unit.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •