Results 1 to 10 of 10

Thread: Stand alone ecu

  1. #1
    Senior Member Dearlove's Avatar
    Join Date
    Dec 2011
    Location
    Perth, Australia
    Posts
    407

    Stand alone ecu

    Right, so since I've never done anything this complicated I'm hoping to get a bit of help from those that have

    I'll post some pictures of the wiring diag's this arvo

    Just wondering how you tell what signal is going/coming to the standard ecu's. For example, there are 5 wires going from the engine control module to the ea/cc/isc module (throttle control). It's going to be stuff like tps signals and what not. Can you get schematics for the computers themselves?



    Last edited by Dearlove; 09-22-2014 at 04:38 PM. Reason: Keeping current

  2. #2
    Senior Member Dearlove's Avatar
    Join Date
    Dec 2011
    Location
    Perth, Australia
    Posts
    407
    Reserved

  3. #3
    Senior Member Dearlove's Avatar
    Join Date
    Dec 2011
    Location
    Perth, Australia
    Posts
    407
    Reserved2

  4. #4
    Senior Member Dearlove's Avatar
    Join Date
    Dec 2011
    Location
    Perth, Australia
    Posts
    407
    Reserve

  5. #5
    Moderator
    Join Date
    Aug 2012
    Location
    SoCalif
    Posts
    1,011
    I have no clue with computer stuff, I just wanted to respond to acknowledge and say I can no way be of help.

    Im actually stressing about my wiring this fan unit I have. All the parts came in and I came into here to study more on those diagrams you posted for me.

  6. #6
    Senior Member Dearlove's Avatar
    Join Date
    Dec 2011
    Location
    Perth, Australia
    Posts
    407
    Haha, it's fucked isn't it.
    I'm probably going to end up gutting all the engine stuff. It's pre can bus and doesn't look like it will be much of a problem

  7. #7
    Junior Member
    Join Date
    Aug 2011
    Location
    Lahore, Pakistan.
    Posts
    8
    what are you trying to achieve if you can tell us, we might be able to help you

  8. #8
    If you have a ME2.1 or ME2.0, this should help:
    http://www.shrani.si/f/2V/Xj/Mp67K1Z/motronic.pdf

  9. #9
    Senior Member John Jones Jr.'s Avatar
    Join Date
    Apr 2013
    Location
    Ireland
    Posts
    829
    Cheers Piko, that's handy to have.
    JJJ.

  10. #10
    Senior Member Dearlove's Avatar
    Join Date
    Dec 2011
    Location
    Perth, Australia
    Posts
    407
    Possible turbo conversion, may put this on the back burner and buy a c43 next week

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •