Results 1 to 4 of 4

Thread: New wheels 17"

  1. #1
    Junior Member
    Join Date
    Aug 2017
    Posts
    15

    New wheels 17"

    https://www.aspiremotoring.com/produ...yABEgL3uPD_BwE

    So basically my 99 C43 has some cheap knock off monos. They are 17". Can't read the casting on the inside to see offset.
    New wheels are 17x8.5 et20 for front and 17x9.5 et30 rear. Just curious how much gap there will be at fender.
    I can't find anywhere posted of this size and offset anybody is running.
    I'm sure I just opened myself up to being blasted on here. That's ok. I am willing to take any comments bad or good.

    Thanks guys.

  2. #2
    Junior Member
    Join Date
    Aug 2017
    Posts
    15
    Tires play a roll I'm sure. Just wanted to know. I really don't want to wear spacers.

  3. #3
    In Charge
    Join Date
    Dec 2002
    Location
    Left Lane
    Posts
    4,500
    If you have a manual, then you could get the factory specs (I dont know them off hand, though I should). Once you have that, use the calculator tool at the top of this section and plug in the OEM then aftermarket wheels. It will tell you how much of a difference between the two and whether or not it will stick out further or inward.

  4. #4
    Junior Member
    Join Date
    Aug 2017
    Posts
    15
    Perfect. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •