I am sure many of you are looking for C32 upgrade for your W202

Well,

Here is what I found out so far.
Originally I have ordered this kit for my friend, but since it took me about 6 month getting from Evosport
so my friend doesn't want it anymore.

So I have been doing some research for quite sometimes on fitting this on my C36.
Most of the people who have done this upgrade they have to use left caliper on the right side and vice versa, in which
resulting the caliper-piston orientation is out of order.
Finally I have a way of fitting this properly on my C36 (correct piston orientation).
This is a bit tricky..


First of all I have to get it custom drilled for that allen bolt that hold the rotor to the wheel spindel.
(wheel spindel)
[img]http://groups.msn.com/_Secure/0RwD**1gTQIXBE15oNSoGhxYOEnNlBqf0Yxez4j8IfAgsJGyZn SZvynMEV0w1u395s6zDP!b0fqS16jxpMOsTZnTe40UaDuCbBSJ lRW4jMac/111-1171_IMG.JPG[/img]

As you can see on the pic below, I already have the rotor ready to bolt on W202/W208/W210 chassis.
[img]http://groups.msn.com/_Secure/0RwBYKVkTfoXBE15oNSoGh9btOPPgE2fT7GJfKCeiixfRRipit HjenHuXDpIJHmqzOFwlwtQI8dFk50jGem4HA1MfjoNVcYOOIqY syJ5w*f8/111-1172_IMG.JPG[/img]

But here is what you should know more before fitting this brake to any W202/W208/W210 chassis.

With this brake 18"monoblok won't fit.

The caliper with come in contact with the wheel
[img]http://groups.msn.com/_Secure/0RwDRAlITg4XBE15oNSoGhxg5ZYUgNcJH!0snD3aw0iKDcE5KS 2QyKvOUlJfBDplYnGPYEJ*n9eScZhp5sKVgGSjroW1a*bAGLWq jztrb7EI/111-1169_IMG.JPG[/img]


Although it actually looks good with them on
[img]http://groups.msn.com/_Secure/0RwAODl8T8obBE15oNSoGhz8SeGIVNFHFPtaV6bnT5i9*9Y9WX TRg5XWnibI1griQfT9cX9i4bsYiZ9PS9XMZQRlHoSh1BZFFvZK rgIxtB1Q/111-1178_IMG.JPG[/img]


They however will fit on 17" AMG SLK (17x7.5 ET37) with about 1mm clearance between the caliper and the spoke.
[img]http://groups.msn.com/_Secure/0RwAAAGATMIfBE15oNSoGhx7ZeRsPD29!*MD1H6V5AjMW8hVtr bKLtIuL1ITEcZOBuMt8el6lilJ1W7!SvV7h0pE2Lh!YBhTx6bI 2MbEHfhY/111-1179_IMG.JPG[/img]

They will also fit on 17" Monoblok II (17x7.5 ET35) just fine with about 2mm clearance between the caliper and the spoke.




I could use this brake setup with 18" monoblok but I will need to use 5mm spacer, in which I am very much against it.
Why..?
Since with the current setup my front wheel offset is just perfect for me, and I don't want to add 5mm offset to change the current offset.
And since I like the way my car looks with 18" mono, I am not willing to get another wheel at the moment just so I can use this C32 brake setup.

For others who probably have a little more option on wheels setup, this clearly this would be the most cost effective way for brake upgrade, and also appearance wise.
Sure Brembo GT kit will outperform this brake, but for the fraction of the price, it is still a very good buy

With that being said I going to sell this kit and offer it for Club202 member who are interested on doing this upgrade.
[img]http://groups.msn.com/_Secure/0RwDjAmETb4fBE15oNSoGh3Ir!6a2p!Rf6tD2QXX1p4ddJjDc! v2i6sFiTHU5pPuHGnpkgkmi04MOxvUi1aH3dPhXWEjBv*XlZUl Bzjkl6i0/111-1189_IMG.JPG[/img]



This brake is still brand-spanking new.


Regardz,