aw dude i've never seen that partition panel removed before...i always thought it was built in...i know the rubber piece comes off
click at this for the picture
i am trying to replace #65 from this picture.
in order to do that i need to remove partition panel green arrowed to reach grommet (#65 in above picture) red arrowed. please send me instructions to remove partition panel in 95 c280
click at this picture to see green and red arrows
aw dude i've never seen that partition panel removed before...i always thought it was built in...i know the rubber piece comes off
Theres a demon in my car i tell yah....its name is KOMPRESSOR lmfao
i thought u are trying to remove 35 not 65,
just start undoing and pulling at parts to try and get it apart
-Logan-
c280nz, i have ordered 65
will update
-Remove anything obstructing the upper half of the sound deadening at the rear of the engine bay.
-remove sound deadening
-Undo screws and remove engine bay divider
-remove #65,Install new #65
-reinstall everything.
If you are unable to see how to do this then a workshop is your best choice.
>>00 C43 Black w/birch Black. Immaculate
>>99 C43 Silver w/CLK55 package
>>99 S202 RED 250TD Daily.
>>89 2.6 RED w/16vkit. POS
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
i consider that i am very close to replacing the grommet. someone please tell me what is the technical name of this structure i need to remove this thingy.
hurray, mission accomplished
part 202 832 11 15 heater pipe line cost $4.32 including tax
labor cost $0
time spent about 3 hours
mucho thanks