-
fuel injectors what fits
well exactly that what all fuel injectors will fit in our motors without much mods and what size injectors do our cars have
-
-
M111 2.0K - Stock -
Siemens 0000788123
280 cc/min @ 3 bar
311 cc/min @ 3.7 bar
323 cc/min @ 4.0 bar
-
-
Bosche style off a lot of domestics fit also.
-
They are the same on the 2.3
-
anything that's about 400cc? to 6? I mean the cc from the 4g63 eclipse motor are 450cc for a set is 460$
-
injector from 4g63 won't fit as the top o-ring is smaller in diameter and also they are low-impedance.
try to find injector that fit bmw and mustange they should work
-
-
yzn what if I ran the fuel rail off of a 4g63 ? or am I thinking of the wrong end of the injector lol and thanks rumB
-
krumb now those are low independence right ? what els would I need as far as the high low part
-
4g63 fuel rail won't work as the spacing between injectors are different compared to the m111, i have machined the 4g63 injectors to fit the original o-ring of the m111 injectors
-
I've been researching a lot of performance options for thee car lately. I know this thread is a few years old but here is some good info I've come across on flow rates of the stock C220 AND C230 injectors-(They all have the same part number from what I've read)
The stock MB injector is a 21.5 lb injector. It has a flow rate of 220cc. (gray body/ green tip) {CLAIM}
Bosch injectors part# 280-155-209 is a 18.8 lb /199 cc 14.25 ohms {Hard Data}
These are all injectors used in the C220, C230 (Not C230K) and C280 motors
Bostech injector part #MP5091 is 23.5 lb / 240 cc {CLAIM}
Bostech injector part #MP5007 is 21.5 lb / 220 cc (same as OEM MB injector- I actually think this may be the OEM ones used by MB because they are the same color: Gray/green tip) {CLAIM}
--------------
Bosch AMG injectors C36 use the 280-155-757 (I've seen claims in adds of 255cc) Data off of 2 different injector cleaning sites (19lbs/ 199.7cc) 14.5 ohms {Hard Data}
http://www.injectorcleaning.co.uk/flow.htm
http://users.erols.com/srweiss/tableifc.htm
Last edited by Vetruck; 06-26-2016 at 09:16 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules