-
280 Technical Information
Can anyone please help me to find the following information on the 280 6 cylinder engine?
- Bore size
- Piston pin diameter
- gudgeon pin height
I am interested in using the pistons out of one for another turbocharged engine, & heard that one of the 280 6 cylinder engines had a bore of 86mm & used forged pistions.
Can anyone provide any answers on this, or point me in the right direction.
Cheers,
3T-GTE
-
C280:
Motor designation M104.941
89.90 x 73.50 B/S
1.22:1 B/S ratio
10:1 Compression
1.5 x 1.75 x 3.0 Rings
I can't find my notes on the deck height and Pin diameter. I remember it is close to a 0.875" wrist pin.
-
Thanks for that info MRP.
From what I have heard they possibly have a pin diameter of:
22mm (0.866139") - which is close to what you have said
And a pin height of:
35mm (1.3779486")
I was also wanting to know, if they are forged pistons or not? I have heard that these are forged & very strong pistons.
Can you confirm if any of this is correct?
Many thanks,
3T-GTE
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules