-
CUTTING BUMPER in way of exhaust
As per title, I've already searched but without good result, does someone have ever performed this bumper cutting? I refer to the non AMG model in order to well fit a sport exhaust.
thanks a lot
-
Moderator
I fitted a C36 muff to mine...
took off the back bumper,fitted the exhaust...
put the bumper back on as close as possible..
marked out the new cutt out..
used a 100mm grinder to carefully cut it out... but dont go too
close to your cuttout line...just get close enough to use sand paper.its also a good idea to continually re-fit the bumper as you grind it to make sure you dont over cut!!...mercedes charge heaps for that little plastic strip on the bottom off you bumper and then you gotta paint it!!!.,I had to replace mine after i chopped off my massive twin straight through muffs.
Good luck
Regards,
Paul
-
Originally posted by 23K
I fitted a C36 muff to mine...
took off the back bumper,fitted the exhaust...
put the bumper back on as close as possible..
marked out the new cutt out..
used a 100mm grinder to carefully cut it out... but dont go too
close to your cuttout line...just get close enough to use sand paper.its also a good idea to continually re-fit the bumper as you grind it to make sure you dont over cut!!...mercedes charge heaps for that little plastic strip on the bottom off you bumper and then you gotta paint it!!!.,I had to replace mine after i chopped off my massive twin straight through muffs.
Good luck
Regards,
Paul
thanks a lot for your kind reply. Don't you have a photo?
Your is a up-dated model like mine with the "little plastic strip" below the bumper? Considering that particular shape, the cut is quite different (the strip is curved)
Thanks again
-
Moderator
sorry no photos at the moment(wish I had a digi cam )...
yes it is the updated rear bumper...
the C36 tips are cut about 20mm up into the rounded bottom lip, i spent alot of time making the cutout about 5mm bigger than the tip so it fits perfect...also be aware that when your exhaust heats up it expands an shifts quit alot iv noticed.
goodluck.
Regards.
Paul
-
Moderator
and I will try get photos up earily next month i hope
-
-
Moderator
Thanks,glad to be of help...
I personally think the tips look better cut into the bumper,but it must be cut tidy,and not to far up into the bumper....
my first exhaust i made form 2.5" mandrel bends with 1 big resonator and two big straight through muffs at the end...
This was way too loud,so i added another resonator,this helped
but was to loud still...
so i chopped of the duel muffs and put the C36 muff on and now its not much louder than factory...
so im thinking of taking one of the resonators out to improve sound....as i found it can be very expensive making this sort of mistakes.
I dont think there has been any improvement in power,it looks the part though
I will steel the digicam from work tonight and try get pics here in the next few days..
Regards,
Paul
-
Thanks again for the info. I'm sure, also without photo, you have done really a good job, as accurate you seem to me.
hi
Marco
-
Moderator
hey i put a pic of the rear on www.cardomain.com/id/silver23k
hope it help you deside.
Regards,
Paul
-
Dear Paul I've appreciated a lot your kind effort to post the pictures. Thanks a lot. I really like how it look. I'd like to do the same asap, considering now I've to solve my problem of balancing (brake disc or wheels??) after replacing the brake
Again thanks
Nice car. You have silver painted the name "kompressor" in the engine bay!
Nice
Besides I'm also reading your other post under performance tuning.
hi
Marco
-
Moderator
hey man no worries...let us know how you get on later.
yeh i find maintenance on the benzes to be very high for some reason.
...I really had to get rid of the red valve cover colour,it looked alittle out of place
Regards,
Paul
-
I cut one side of my C36 bumper in order to match the other side so I could fit a quad exhaust. Very easy.
-
Moderator
Originally posted by Brabus
I cut one side of my C36 bumper in order to match the other side so I could fit a quad exhaust. Very easy.
I saw i pic of that somewhere...Very nice
-
[QUOTE]Originally posted by 23K
[B]hey i put a pic of the rear on www.cardomain.com/id/silver23k
hope it help you deside.
Looks good! I guess most people go with the square amg tips instead of the round ones... How much worse do you think it will look if you don't cut the bumper away?
-
Moderator
thanks,actually iv seen alot more round tips than square...
I personally think the square suit 202 more...
the problem with going under the bumper is the muffler angles down and looks funny i think...
but everyone to there own
Regards,
Paul
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules