pull it off and slide it back on taking note how it slides onto the rail. then you will be able to tell where the alignment problem is.
I was just looking at J's front bumper and it seems like we had the same problem alignment from the left side (facing the car). Any clue on how I can correct this problem?
E55 2000
M-3 2014
pull it off and slide it back on taking note how it slides onto the rail. then you will be able to tell where the alignment problem is.
0118 999 881 999 119 7253
what kind of miss allingment are you having?
up and down?
inner and outer?
Past: 1997 W202 C36 AMG
Thanks guys. It's kindna hanging down. I'll try to pull it out again and reinsert it and try to adjust from there. I think I'm missing some clips that holds the outer face of the bumper.
E55 2000
M-3 2014
For up and down, the bumper is held by 4 screw in the front.
For in and out, the bumper is helb bu 1 clip of each side.
Do what you need to do is take out the bumper, readjust the clip position on left and right and try to insert the bumper again.
Past: 1997 W202 C36 AMG
mine is all broken n shit......i don't even botehr to adjust anymore..
I'll see once I pull it out but I believe I need to adjust it from the 2 inserts on each side to tuck it in better on both side. I'll let u know what happen's next. Hehehehehe... something to play around with again and learn from it too.
E55 2000
M-3 2014
Hi all,
new here and its my first post on club202!!
ive had the same sagging prolem on my bumper, i have already bought the brackets and bracket holders for each side but havent put them in yet, normal adjustment just didnt do anything!
Alps
C36 AMG 1997 18\" Mono II, Light Smoke tints, Avantgarde grill, folding dimming 210 mirrors, H&R`s, Alpine Multimedia, Soundstream, OEM Xenons more to come.....
I riveted those clips into the bumper where the chrome strips cover. Sturdy as hell now and no sag.Originally posted by pnsji
For up and down, the bumper is held by 4 screw in the front.
For in and out, the bumper is helb bu 1 clip of each side.
Do what you need to do is take out the bumper, readjust the clip position on left and right and try to insert the bumper again.
I riveted the clips near where the headlight meets the grille, where when yuo take of the bumper ther are foam pads and 2 mount looking things...they protrue a thing that fits onto the bumper..i riveted those into the bumper itself.
2005 TSX Graphite Pearl Auto With NAVI
Autostart Autostarter
Progress Rear Sway Bar
USDM Bodykit
USDM Foglights
1997 AMG C36 (RIP Thank God)
OEM Bosche Clear Corners
OEM AdvanteGarde Grill
Bilstein Sport Shocks
Eibach Springs
Zender rear lip spoiler
Speedybenz custom rear camber arms
W210 mirrors
Welcome and enjoy your stay here at club202.Originally posted by Alps
Hi all,
new here and its my first post on club202!!
ive had the same sagging prolem on my bumper, i have already bought the brackets and bracket holders for each side but havent put them in yet, normal adjustment just didnt do anything!
E55 2000
M-3 2014
thanks JRE
is yours the white 202? if so what spoiler id that on the back? looks cool!
Alps
C36 AMG 1997 18\" Mono II, Light Smoke tints, Avantgarde grill, folding dimming 210 mirrors, H&R`s, Alpine Multimedia, Soundstream, OEM Xenons more to come.....
Schaetz flat wing.Originally posted by Alps
thanks JRE
is yours the white 202? if so what spoiler id that on the back? looks cool!
E55 2000
M-3 2014
thats the notorious spoiler, the most sought after commodity for my 202 too.Originally posted by Alps
thanks JRE
is yours the white 202? if so what spoiler id that on the back? looks cool!
Yeah adjusting your from bumper and be a pain, i fiannly got it right last weekend and now it looks perfect, there are so many adjustments.
I think it is more difficult to adjust the bumper if you are only using a floor or jack stand rather than lifting the entire car.Originally posted by 714guy
thats the notorious spoiler, the most sought after commodity for my 202 too.
Yeah adjusting your from bumper and be a pain, i fiannly got it right last weekend and now it looks perfect, there are so many adjustments.
I did a little adjustment and still I think I really need some clips or rivets to make to hold tigther.
E55 2000
M-3 2014
Hey Alps,Originally posted by Alps
thanks JRE
is yours the white 202? if so what spoiler id that on the back? looks cool!
Welcome to the forum!
Past: 1997 W202 C36 AMG
You ow what i'm talking about right JRE? Thie 2 hook looking things need to be rivited intot he bumper and hides underneath the chrome strip. It's so sturdy now after i did that.Originally posted by JRE320
I think it is more difficult to adjust the bumper if you are only using a floor or jack stand rather than lifting the entire car.
I did a little adjustment and still I think I really need some clips or rivets to make to hold tigther.
2005 TSX Graphite Pearl Auto With NAVI
Autostart Autostarter
Progress Rear Sway Bar
USDM Bodykit
USDM Foglights
1997 AMG C36 (RIP Thank God)
OEM Bosche Clear Corners
OEM AdvanteGarde Grill
Bilstein Sport Shocks
Eibach Springs
Zender rear lip spoiler
Speedybenz custom rear camber arms
W210 mirrors
i did while the car was on the ground took a hour to get everything perfect and got all scratched up too.Originally posted by JRE320
I think it is more difficult to adjust the bumper if you are only using a floor or jack stand rather than lifting the entire car.
I did a little adjustment and still I think I really need some clips or rivets to make to hold tigther.
Thanks pnsji, nice car you have there looks sleek!
i will try and post some pics up of mine soon!
Alps
C36 AMG 1997 18\" Mono II, Light Smoke tints, Avantgarde grill, folding dimming 210 mirrors, H&R`s, Alpine Multimedia, Soundstream, OEM Xenons more to come.....
I tell you it's not easy while the car is on the ground. Guess you guys would agree with me that it's much easier if you are standing and the car is lifted up while fixing it.Originally posted by 714guy
i did while the car was on the ground took a hour to get everything perfect and got all scratched up too.
E55 2000
M-3 2014