Pull the fuse box out and you will see the pass through.
whats the best way/ location to run wires through the firewall (from engine bay into the interior)? whether it be drilling (best place to drill hole) or where there is allready a spot. thanks! =)
99 c280 (WHITE)
In the midst of modding.
(list of stuff too long...just link to your gallery thread)
Pull the fuse box out and you will see the pass through.
0118 999 881 999 119 7253
I opened the fuse box on the left side of the engine to run wires. I used a coat hanger and tape. Took apart the driver side carpeting and kickpanel. 30min and I was done.