contact speedybenz. he makes rear camber arms.
nenad
anyone know any website or company where I can purchase a set of CAMBET KIT for the back...just got my computer back and I lost all the favorite website I need to research.
thanks ahead......
Thi (ty) Tu
Salt Lake City, Utah(US.A.)
-dame is really cold here-
contact speedybenz. he makes rear camber arms.
nenad
2002 S500
2002 CLK430 w/ 5.5L swap
2002 SLK32 AMG
2003 S430 w/ 5.0L swap
2000 ML55 AMG
Yes, he does, but very hard to get a hold of. If you are able to let me know that I want one too.
1999 C230 Kompressor Sport, 197
The modding has started. Too many to list. Stay Tuned.
just order one off his site and see, what happens
BAN HIS ASS!!
744 C36 AMG- carlsson
040 C43- way to many modifications
744 CLK55- even more mods
CLS55 IWC edition
744 CLK500 Rocket Bunny widebody
what is his website? I think is easier to order that way then trying to get in touch with him...sound like he's a busy man
Thi (ty) Tu
Salt Lake City, Utah(US.A.)
-dame is really cold here-
It's in the description of Suspension Tuning on the main forum page.Originally posted by slam96c36
what is his website? I think is easier to order that way then trying to get in touch with him...sound like he's a busy man
oops
if you cannot get a set off him it is possible to make them yourself (or using an engineer/fabricator anyway)
-Logan-
I think HOP (house of power) has camber arms for your ride also. I know I have seen them on CLK's. I'm certain they are a couple $$ more but they are a two piece kit which should allow for less suspension binding.
HOP is a tight shop as I was out their not long ago.....small but very specific with detail, quality, and know how. You should see the vortech S/C system they build.
I've got contact info if needed. Don't put it off for too long.
.....I drive sideways.....
*98\'C43 Supercharged
*H&R springs
*Bilstien Shocks
*Magnecore race wires
*Phelonic intake spacers
*Bosche Clears
*Custom 3in stainless exhaust
*Renntech Monolite 18\'s
*Some other stupid stuff
http://i88.photobucket.com/albums/k198/nitrogenbalance/0801.07pics054.jpg
thanks a bunch...if you have their info, hook me up..cause Iam in need of a set asap. BTW I've been trying to reach Speedy for sometime but I guess the guy is hella busy.
Thi (ty) Tu
Salt Lake City, Utah(US.A.)
-dame is really cold here-
Ordered mine from Speedy last Nov. Have not seen anything yet. It turns out my ride does not need the adjustable arms. There is a minor amount of camber that is not adversly affecting the tire wear.
Note: Neither of my 202's need the adjustable arms. Your might not either.
Hotbasco...
so for up to how many degrees of neg camber would abnormal tire wear occur? i contacted speedy a while ago and he said he's got no problem at making some of these.
less than 2 degrees should be fine for tire wear
-Logan-
I lower my car about 2 1/2 " so I know I have some negative there...I just replaced 4 new tires about 2 months ago and saw the problem on the old tires...
Thi (ty) Tu
Salt Lake City, Utah(US.A.)
-dame is really cold here-
my winter tire set is the same size all around so i can rotate and i always check tire pressures like twice a week. the rear of my car has -2.49 (r/r) and -2.51 (l/r) of camber but previous set of tires on my car have always showed even wear and i don't have the camber arms.Originally posted by trymonlam
so for up to how many degrees of neg camber would abnormal tire wear occur? i contacted speedy a while ago and he said he's got no problem at making some of these.
with the staggered monoblocks i have now for summer, obviously i can't rotate anymore though!
Jason
Jason
2006 BMW 525XI (Silver Gray Metallic)
-----------------------------------------------
1995 C280 (Smoke Silver Metallic) - 348,900 Original Miles - SOLD March 2010
1988 Saleen Mustang - 1 Of Only 17 - 50,514 Original Miles - SOLD June 2009