Results 1 to 3 of 3

Thread: c36 trans won't go in rev

  1. #1

    c36 trans won't go in rev

    It feels like it engages but won't move. In the weeks past it has hesitated when engaging in rev. Any thoughts on this issue.

  2. #2
    Senior Member
    Join Date
    Apr 2005
    Posts
    380
    You could start by placeing the car nuetral and make sure it rolls backwards ok. That will make sure the brakes are OK. Are all the forward gears includeing first OK?
    1993 ZX6E
    1996 C36
    1972 240Z
    1993 Bayliner 1750


    The one who dies with the most toys wins!

  3. #3
    Yes all the forward gears are good, it feels and sounds like rev engages but no movement and it wil not roll . Neutral rolls free, I am guessing rev is out and I wonder if anyone has been through this to let me know if the whole trans needs to be rebuilt or can rev only be repaired to keep cost down.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •