View Full Version : 2000 230 Kompressor Brakes Info
hyperion
09-29-2006, 02:58 PM
I am in need of some torque values:
1) Screw that holds rotor on to hub
2) Caliper bolts
3) Brake wear sensor
Thanks
Ted
Proven Guilty
09-29-2006, 03:21 PM
Originally posted by hyperion
I am in need of some torque values:
1) Screw that holds rotor on to hub
2) Caliper bolts
3) Brake wear sensor
Thanks
Ted
when i did my brakejob, i did everything with hand tools.
-the brake pad sensors can be popped out with a flathead screwdriver.
-the allen key that holds the rotor to the hub may be stuck tightly on from rust and corrosion; so you may need to break that one loose with a hammer rachet (tool that you hit on the head with a hammer to achieve incremental turns, they're like $8 at an auto parts store).
-caliper bolts i also did with just a hand rachet, those shouldn't be too bad to get off, but you can always slip a small piece of pipe over the tool to make it longer, for extra torque so you dont bust your knuckles trying to loosen them up if they're extra snug ;)
hope that helps!
hyperion
10-03-2006, 06:40 AM
If anyone is interested I found out some values from Mercedes.
Caliper bolts front (7mm allen) 16 ft-lbs
Sensor Bolt 8 NM
This is for a 2000 C230K
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.