ebay custom intakes? less than $20

[hideric]

guys, if you check around ebay, they are starting to have custom intake kits for less than 20 bucks. what is the deal with that and do they even work? coz i heard alot of people here make their own with good and high end filters like k and n.

so if possible, can anyone just explain what r those intakes from ebay?

[iwhocorrupts]

I think I know what you're talking about and those are just K&N cone filters.. they're not custom for the 202 theyre just short ram bolt on. As far as I know you can't get a cold air intake for our cars unless its custom fabricated.

[97C28O]

We don't sell the eBay intakes so we wouldn't know. Also, I believe there is no 202er's here have the eBay intake. Most are custom fabricated. There is lots of threads on intakes. I have Weapon R Secret Weapon Intake. And yes they are only short rams.. No one makes cold air intakes for 202s

[Espresso]

Why bother with one? Are you flowing the limit of the stock one now? Putting a metal pipe in a hot engine bay will not gain very good results. It heats up quick & takes longer to cool than the stock pipe.
I modified my stock filter box, because that is about all that is needed because of VERY small opening at the front of it. I left the tube that goes up the the grill so it still gets frontal air(the small opening into the box. I just dont have it on the box in the pics). & I cut two holes on the bottom of the box. The results were immediate. I do infact get better gas mileage and better idle, MAYBE a slight increase in performance( it does accellerate a bit faster).
All it cost was about 20 minutes total with my dremel tool. I do not see the need..other than the bling factor to add a CAI to an MB...unless ofcourse you are doing alot of performance work.


http://i3.photobucket.com/albums/y92/Black05PT/C280%20sport/Picture1056802.jpg
http://i3.photobucket.com/albums/y92/Black05PT/C280%20sport/Picture1056800.jpg
http://i3.photobucket.com/albums/y92/Black05PT/C280%20sport/Picture1056801.jpg

[therock2689]

I made my custom and i do like it and feel a difference. But the heat soke thinf is true, i have a Scangauge 2 hooked up when i shut down and then start soon after there is alot of heat soke, but im going to heat wrap it and that should make a huge diffence on that. but at speed, the intake temp is about the temp outside +~3 deg. Even at full boost, it might only go up about 8 deg or so, not bad for FI and a crappy i/c.