Fog bulb size

[Markland556]

Well im looking to get HID's for the headlights i bought. The seller said they are the same size as teh stock bulbs.
These are the headlights i got Link (http://cgi.ebay.com/ebaymotors/94-00-Mercedes-W202-C-Class-Projector-Headlights-Smoke_W0QQcmdZViewItemQQcategoryZ33710QQihZ010QQit emZ200065329073QQrdZ1)
can anyone tell me what bulb size i would need.

[taimyshukah]

Go take a look at your OEM headlight housing. It should say it on the lens if you look closely. Im guessing it can be either H1 or H7.

[Markland556]

found someone else on here that said its an H3

[Denlasoul]

Have you checked your Owner's Manual? Usually have tidbits like that listed in them.

[K1 Motorsport]

Stock W202 uses H7 low-beam bulbs.
Luckily, we do have H7 HID kits. :D

[bish0p]

i think it's best to just go out to your car and look at it. I've seen many threads concerning bulb size and it seems that it varies. My car is h3 fog and h4 for low/high beam. Others seem to have H7 for low beam. so best bet is to just go out and look at it. should say on the lenses but if it doesn't then it only takes a second to take out the bulbs. good luck with that. those are the projectors that i want to get too. let me know how your beam pattern turns out. Just park close to a wall and turn your lights on and take a picture of the cut off line.

[anf6789]

when i went to replace my bulbs with PIAA super plasma GTX bulbs my owners manual said i had h1s, but i checked and they were h4 hi/low bulbs and my fogs are h3, just pull out your stock bulb in the back of the headlight housing and check to make sure