PDA

View Full Version : C36 catback exhaust



omeyhomey
05-13-2007, 03:14 PM
....................

benzboy
05-13-2007, 04:10 PM
Hey Omey

Not straight thru, paul (23k) cut one open. It goes into the back chamber, back into the front through a different set of pipes then finally out again to the tips

Also, my piping is 2.75" on my C36, dunno if US spec is different??

benzboy
05-13-2007, 04:34 PM
Was just about to post that :p

benzboy
05-13-2007, 04:37 PM
Omey, you have PM

NISMOPOWERED
05-13-2007, 05:31 PM
You might not get any more out of it. The engine makes torque not h/p. So it needs backpressure, take to much away you might get more h/p but lose the bottom end.

69chevelle
05-14-2007, 02:39 AM
What is the most any of you guys would pay for that exhaust in that condition? I was thinking of picking it up and cutting the tips off..

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=009&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=190112180605&rd=1&rd=1

jnolte
05-14-2007, 03:33 AM
why would you cut off the tips, if you wanna go that route might as well go with a totaly diffrent brand. the amg tips rock

69chevelle
05-14-2007, 10:43 AM
I'm sorry...I mean cutting and putting the tips on my car. Thats the only good part left on the exhaust...
Do you think the muffler is still good after all these years?

Ashkan's C280
05-14-2007, 01:25 PM
Originally posted by benzboy
Omey, you have PM

what are NTK Oxygen Sensor? Any benefit from oem?