PDA

View Full Version : How can i get more horsepower out of the c220?



spasmo
05-18-2007, 04:51 PM
How can i get more power out of a 4 cylinder engine?Any suggestions?Im tired of that slow take off!!!!help me...

Cru328prod
05-18-2007, 05:33 PM
Originally posted by spasmo
How can i get more power out of a 4 cylinder engine?Any suggestions?Im tired of that slow take off!!!!help me...

Lmao don't even bother......just save your money on making the sound system rediculus lol.....u wanna know why, because there always some lil rich bit*h with a 50 times faster and better looking car then ours.

AirPost
05-18-2007, 07:02 PM
I'll be doing some performance mods soon on my 4 banger and personally, I would just stick to the worthwhile upgrades like the intake, exhaust, crankshaft pulley + performance chip and a new MAF. The more expensive mods like replacing the headers, turbo install or even engine swap I just find hard to justify with how I use my car and for financial reasons.

Of course, If money is no object, I'll have a rolls-royce jet engine installed already. :p

There are a lot of topics on this one, not specifically for a C220, but in general.



http://img201.imageshack.us/img201/913/streetlegalvwpowered2qn6.jpg http://img201.imageshack.us/img201/2103/streetlegalvwpowered4pb2.jpg
http://img208.imageshack.us/img208/8052/streetlegalvwpowered6wc7.jpg

Green Lantern
05-18-2007, 07:53 PM
damn dude, whats the 1/4 time on that thing :D

yusuke280
05-18-2007, 08:03 PM
molsenman has a turbo kit for our 4-cylinders.

i know a person has done it. much more lower end torque and power.

AirPost
05-18-2007, 08:17 PM
damn dude, whats the 1/4 time on that thing Not sure. It has 1350 hp with a 26,000 rpm/13,000 rpm idle. One thing I'm sure though, I hate to be the car behind him when he fires it up :D

yusuke280, any links to that turbo kit?

stox
05-18-2007, 09:21 PM
You could do what was done to this car:

Twin Engine Olds Toronado (http://cgi.ebay.com/ebaymotors/Oldsmobile-Toronado-Concept-Car-1966-Grant-Two-Engine-Olds-Toronado-Very-Rare-Find_W0QQcmdZViewItemQQcategoryZ31865QQihZ005QQite mZ150123675418QQrdZ1QQsspagenameZWDVW)

Put another engine in the trunk. :cool:

Cru328prod
05-19-2007, 04:05 AM
lmao you'll be able to go like a block without running outta gas, but fu*k it, it'll be worth it. after that who woulda wanna race you then.

spasmo
05-19-2007, 05:43 AM
I changed my exhaust already,next i'll do a intake.What kind of performance chip can i get?And will that damage a car with a high mileage engine?

AirPost
05-19-2007, 08:02 AM
Powerchip, SpeedInnovation, etc...
If you have plans of changing your pulley, better to do it with the chip so your car won't run lean.

Still waiting for one of the members here to pull through with a crankshaft pulley for M111 so I can do the chip. :Ponder:

C280/////AMG
05-19-2007, 10:22 AM
Originally posted by AirPost
Powerchip, SpeedInnovation, etc...
If you have plans of changing your pulley, better to do it with the chip so your car won't run lean.


Surely his car won't run lean when he changes the pulley as his car is na?

rman
05-19-2007, 11:08 AM
i find with MB it's pretty hard to make good power unless you go FI. That's not always convenient.

otherwise i'd say just run NOS thru the bitch.

AirPost
05-19-2007, 11:21 AM
-------------------------------------------------------------------------------
Surely his car won't run lean when he changes the pulley as his car is na?
------------------------------------------------------------------------------

Isn't it if you change the diameter/weight or any characteristics of your stock pulley, this would offset your ecu thus might produce leaner or richer mixture for all types of engines?

Cru328prod
05-19-2007, 11:56 AM
Originally posted by rman
i find with MB it's pretty hard to make good power unless you go FI. That's not always convenient.

otherwise i'd say just run NOS thru the bitch.


i said it once and i'll say it again........no forged pistons no nitrous:D lmao

NickDellhall
05-19-2007, 12:22 PM
didn't someone here use to have a turbo 220 that went on fire or something?

rman
05-19-2007, 02:29 PM
Originally posted by Cru328prod
i said it once and i'll say it again........no forged pistons no nitrous:D lmao

you can squeeze on any engine, as long as it's done properly. Not giving it more than it can handle, and more importantly, a good tune.

the tune is EVERYTHING.

NEA-4311
05-20-2007, 02:41 AM
Originally posted by NickDellhall
didn't someone here use to have a turbo 220 that went on fire or something?

Yes, I believe you mean jstrat85 right? Hey, ask him.

undercover
05-20-2007, 03:12 PM
find a lexus with a v8 engine at the wreckers and do a engine swap or a SR20 or RB26 engine swap :P
ive heard of, but not yet seen, a c220 with a lexus V8. im tryna hunt it down to have a look see. also theres another c220 with a 13b PP turbo..abit insane..way to much money gone into that engine but it would be better off in a WAYY lighter chassie..
also a 190e with a Evo engine. i got pics of the c220 with the 13b and the 190e with the evo engine. ill post it up soon

Green Lantern
05-20-2007, 05:17 PM
post them pictures up lol. imagine a 190e EVO with a evo 9 engine. i dont think our german engine bays can fit a sr20 or can it?

kyo216
05-20-2007, 05:18 PM
Originally posted by undercover
find a lexus with a v8 engine at the wreckers and do a engine swap or a SR20 or RB26 engine swap :P
ive heard of, but not yet seen, a c220 with a lexus V8. im tryna hunt it down to have a look see. also theres another c220 with a 13b PP turbo..abit insane..way to much money gone into that engine but it would be better off in a WAYY lighter chassie..
also a 190e with a Evo engine. i got pics of the c220 with the 13b and the 190e with the evo engine. ill post it up soon

haha wow if youre going to put a skyline or silvia swap you might as well buy a 240sx.

undercover
05-20-2007, 10:22 PM
Originally posted by Green Lantern
post them pictures up lol. imagine a 190e EVO with a evo 9 engine. i dont think our german engine bays can fit a sr20 or can it?

190E EVO (http://www.trademe.co.nz/Trade-Me-Motors/Cars/Mercedes/auction-29732285.htm)

okay heres and expired listing the guy had put up selling his 190E Evo, im still at uni, ill get the pics up soon. also i thought this was interesting :) Louis Vuitton Paint job W202. dont know if you guys have seen it

the owner is toni.

http://file025a.bebo.com/3/large/2006/11/12/01/77076599a2527416702b3561946l.jpg
http://file013a.bebo.com/6/large/2007/04/12/00/77076599a4080538451b692125122l.jpg

and this was her first merc, 500SE with a 13B Turbo engine.

http://file004a.bebo.com/large/2005/12/07/05/77076599a77083045b819655271l.jpg

and yeah a SR20DETT engine can fit :P some minor adjustments and a big bite out of your pocket! lol
ill get more pic's up with mercs and engine conversions

undercover
05-20-2007, 10:25 PM
Originally posted by kyo216
haha wow if youre going to put a skyline or silvia swap you might as well buy a 240sx.

LOL, might az well :P
or be different and have a japanese power a german-made go sideways like mad :D
cant wait to see 23K's turbo project to finish and take it on the rd! :P

Green Lantern
05-21-2007, 05:16 AM
Originally posted by undercover
LOL, might az well :P
or be different and have a japanese power a german-made go sideways like mad :D
cant wait to see 23K's turbo project to finish and take it on the rd! :P
cant wait for his car to be up and running to. but the sr20 engine is about 4-5 grand depending on mileage and installation should be around 1-2g depending on the mods we have to make so it fits.

undercover
05-23-2007, 09:07 PM
heres the pic of the 190EV0

http://i110.photobucket.com/albums/n117/kidtimmy/21523156_full.jpg

http://i110.photobucket.com/albums/n117/kidtimmy/21523219_full.jpg

http://i110.photobucket.com/albums/n117/kidtimmy/21523300_full.jpg

Green Lantern
05-25-2007, 05:16 PM
is that a sr20 motor? and MAN that muffler looks huge on that car

undercover
05-25-2007, 06:55 PM
Originally posted by Green Lantern
is that a sr20 motor? and MAN that muffler looks huge on that car

nahh this is the one with the evo 1 motor in it..it whacked az..im getting engine bay pics soon from the dude who used to own it