PDA

View Full Version : new AMG door seals



Section 8
06-22-2007, 12:27 PM
hope i dident outbid any of u guys for emm but some one was trying lol

http://img265.imageshack.us/img265/9812/img2822aw6.jpg

gonna fit them after i get the car resprayed, any one else got these fitted, any tricks to it....thx

JRE320
06-22-2007, 01:38 PM
Does it light up?

Section 8
06-22-2007, 02:43 PM
no.......makes it less special lol

OzC36
06-23-2007, 04:56 AM
These normally are secured with double-sided tape.

Just make sure you clean the existing plastic kick plates with a cleaner that will remove grease, wax, dirt etc so that the double-sided tape has something clean to hang on to.

They should look great!

MTI
06-23-2007, 02:46 PM
I would suggest covering them with the 3M clear protection plastic. The thresholds do tend to get scuff'd up.

Section 8
06-23-2007, 04:16 PM
cool thanks for he advice so i just pop these on top of the plastic stock

thanks

kickboxin
01-16-2008, 10:27 PM
I saw these too. Any pics installed?

Denlasoul
01-17-2008, 07:19 AM
When yuo pull off the old ones, take the rubber ends and stick them onto the AMG sills. It will cover the sharp edges of the AMG sills.

NEA-4311
01-17-2008, 08:29 AM
Originally posted by Denlasoul
When yuo pull off the old ones, take the rubber ends and stick them onto the AMG sills. It will cover the sharp edges of the AMG sills.

They go on top of the OEM ones... And double sided tape wont do shit... Silicone them on top of the OEM ones. You must completely remove the OEM set and once you glue the AMG on top, wrap it with tape (double rings in every 3-4 inches) and leave them overnight to dry. Then install.

And you might want to do something about those sharp edges too because your pants or even worse, the passengers pants will get caught sometimes. Mine did and I almost rip the entire sill apart... My cousin did the passenger one and I thank God it didnt brake. Yours on the other hand are just INOX, ergo more durable.

RemoLexi
01-17-2008, 08:34 AM
yea I have a similar set but mine used to light up, the double sided tape sucks i only kept them because they didnt look Soooo bad. yea some clear vinyl over them would be cool they get scuffed up easy. my rear ones are all bent and cracked already from ignorent people. :confused:

over all I think the set I had was total POS quaility. I need to find a new glowing set that REPLACES my stock ones instead of covers them.

kickboxin
01-17-2008, 08:49 AM
Who makes the ones to replace the stock ones? A friend has a '00 c230 that has aluminum ones. My '98 C43 has cheap plastic ones with thin aluminum strips that are peelling.

lamf
01-18-2008, 11:22 AM
niceeeee!!! the illuminated amg sills are definately gonna be my next mod after everything i gots taken care of

Arif
01-20-2008, 04:23 AM
Very nice!

Can anybody tell me the original code of AMG door seals, and Sport-DTM door seals?

jnolte
01-20-2008, 04:54 AM
amg light of sill are not avaliable oem from mercedes its a taiwanese shit part

Arif
01-20-2008, 05:05 AM
I want without light