View Full Version : bolts size?
svt ricco
07-05-2007, 11:51 AM
are all the bolts for all the 202 the same size or is there a difference between amg and non-amg? i'll be getting a set of 18's from a c280 so i was wondering my stock bolts will do. thanks in advance
tpliquid
07-05-2007, 11:56 AM
new set of what 18?
hvmercy
07-05-2007, 11:58 AM
depending on the type of wheel you get.
I changed mine from stock 8 hole
to AMG 170 and I had to change to
longer bolts.
hvmercy
07-05-2007, 12:00 PM
Originally posted by tpliquid
new set of what 18?
^^^
tpliquid
07-05-2007, 12:01 PM
oh amg
when i change from my stock 8 hole to monoblock 2 i use same lugs
JRE320
07-05-2007, 12:04 PM
I used my stock bolts too.
hvmercy
07-05-2007, 12:06 PM
Originally posted by JRE320
I used my stock bolts too.
too short Jun. The head is burried in there
and hard to get to.
svt ricco
07-05-2007, 12:30 PM
ok,sinigurado ko lang jun kasi baka mamaya pag nagkaayos tayo sa linggo,maging problema pa yung bolt. 11am ba? pwede ba after lunch kasi magma-mass pa ako ng 10:30am?
svt ricco
07-05-2007, 12:34 PM
tp, its a set of used amg mono II's, 18",8" wide,et35 all around
svt ricco
07-05-2007, 12:36 PM
oh btw,thanks everyone for your replies
jnenad16
07-05-2007, 12:46 PM
you have to be careful not to use too long bolts on the back wheels as you might damage the parking brake.
nenad
svt ricco
07-05-2007, 12:49 PM
i'll be using my stock bolts, is there a problem with that?
JRE320
07-05-2007, 01:49 PM
Originally posted by svt ricco
ok,sinigurado ko lang jun kasi baka mamaya pag nagkaayos tayo sa linggo,maging problema pa yung bolt. 11am ba? pwede ba after lunch kasi magma-mass pa ako ng 10:30am?
O'k after lunch. See you... ;)
jnenad16
07-06-2007, 12:30 AM
Originally posted by svt ricco
i'll be using my stock bolts, is there a problem with that?
depends on your new rims. put a bolt throught the rim and see how long it sticks out of it. if its 1" and under(but not less than 1/2"), it should be alright.
nenad
OzC36
07-06-2007, 06:55 PM
For what it is worth, this is a photo of the correct lug bolt for the original AMG alloys on my C36. It has a 39mm shank length:
http://img512.imageshack.us/img512/7638/amg72mmlugbolt12x39shanvf8.th.png (http://img512.imageshack.us/my.php?image=amg72mmlugbolt12x39shanvf8.png)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.