bolts size?

[svt ricco]

are all the bolts for all the 202 the same size or is there a difference between amg and non-amg? i'll be getting a set of 18's from a c280 so i was wondering my stock bolts will do. thanks in advance

[tpliquid]

new set of what 18?

[hvmercy]

depending on the type of wheel you get.
I changed mine from stock 8 hole
to AMG 170 and I had to change to
longer bolts.

[hvmercy]

Originally posted by tpliquid
new set of what 18?


^^^

[tpliquid]

oh amg

when i change from my stock 8 hole to monoblock 2 i use same lugs

[JRE320]

I used my stock bolts too.

[hvmercy]

Originally posted by JRE320
I used my stock bolts too.

too short Jun. The head is burried in there
and hard to get to.

[svt ricco]

ok,sinigurado ko lang jun kasi baka mamaya pag nagkaayos tayo sa linggo,maging problema pa yung bolt. 11am ba? pwede ba after lunch kasi magma-mass pa ako ng 10:30am?

[svt ricco]

tp, its a set of used amg mono II's, 18",8" wide,et35 all around

[svt ricco]

oh btw,thanks everyone for your replies

[jnenad16]

you have to be careful not to use too long bolts on the back wheels as you might damage the parking brake.

nenad

[svt ricco]

i'll be using my stock bolts, is there a problem with that?

[JRE320]

Originally posted by svt ricco
ok,sinigurado ko lang jun kasi baka mamaya pag nagkaayos tayo sa linggo,maging problema pa yung bolt. 11am ba? pwede ba after lunch kasi magma-mass pa ako ng 10:30am?

O'k after lunch. See you... ;)

[jnenad16]

Originally posted by svt ricco
i'll be using my stock bolts, is there a problem with that?
depends on your new rims. put a bolt throught the rim and see how long it sticks out of it. if its 1" and under(but not less than 1/2"), it should be alright.

nenad

[OzC36]

For what it is worth, this is a photo of the correct lug bolt for the original AMG alloys on my C36. It has a 39mm shank length:

http://img512.imageshack.us/img512/7638/amg72mmlugbolt12x39shanvf8.th.png (http://img512.imageshack.us/my.php?image=amg72mmlugbolt12x39shanvf8.png)