Clear Corner Installation

[Devero]

I was wondering if there was a HOW-TO on this or if some one could help me out.



and i just wanted to make sure these are good for my 98 C230. thanks

Clear Corners (http://cgi.ebay.com/ebaymotors/94-00-MERCEDES-BENZ-W202-CLEAR-CORNER-LIGHTS-C220-C230_W0QQcmdZViewItemQQcategoryZ33708QQihZ004QQite mZ140150329971QQrdZ1QQsspagenameZWDVW)

[D-money]

If your c230 is like my c280 you open your hood, disconnect the blinker wire, and if i remember correctly you just push out the corner light, there possible might be 1 screw, sorry i changed mine long time ago, dont remember

when i bought my clear corners from ebay, the light bulbs were not compatible with the stock wire connector. so i put in my original bulbs in the clear corners and worked fine. i dont know if ur corners will be like that, but if so, what i did could be a solution

[Devero]

Does anyone know if these are the Bosch corners, or know where i can find them? thanks

[AirPost]

Looks exactly like mine. My clear corners for my 97 C230 was made by Depot and is very easy to replace. As D-money mentioned, open the hood, disconnect the wire and press on the silver tab that holds the assembly in place. If you look at the picture in your Ebay link, there is a gray tab on the rightside of the lens.

For Bosch clear signals, other members have bought theirs from Bekkers.

[DynoXG]

I find it easier to disconnect the wire after unclipping and pushing it out. Also remember to catch the corner as it comes out or it can scratch your bumper. To push out corner, slide your hand through the back of the corner and feel around for a "tab" when you push in and out. Take a look at the new unistalled corner lights to get an idea of where you will find the tab.