Wheel Offset Question

[WizC230]

I found some nice Chrome Monoblocks on ebay fairly cheap but the offset says there for a w124 whill they fit my 202 ?

[JRE320]

Try using "SEARCH" first before asking. :rolleyes:

[NEA-4311]

Yes it will as long as it is 5x112, the ET is 35 minimum and the bore is 66.6 or larger (to use an adapter, make sure you find one 1st). And yes, learn to use the search button, its very helpful.;)

[WizC230]

These are 16" X 7.5" The bolt pattern is 5 X 112 mm The offset of the wheels is ET +40 mm

[NEA-4311]

It will fit 100%.

[WizC230]

Bought them ! Now any recommended sizes of tires and brands ?

[NEA-4311]

This has been covered pretty much as well. Whats under your hood anyway?

[WizC230]

its the 2.3l Kompressor engine.

[NEA-4311]

Well you have more than enough power to support a set of 17s or 18s, why did you choose the 16s anyway? If you want a car to look sporty on 16s you have to super lower it and even if you do that, your wheels are still too narrow (7.5J - ET40) to fill the body of the car. That means you will have to spend more money to buy a set of spacers. And spacers are not the same thing as wider wheels in the first place.

[WizC230]

I went with 16 because they were $280 for the set of 4. And there chrome AMG Monoblocks.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=010&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=200148590668&rd=1

[JRE320]

If I were you I would back out. and you should be posting this in suspension.

[ryhi]

those are nice. id rock them as vegas rims.

[maxboxa]

man, the mods are slow...



moved for better 'searchability'