Has anyone figured out a way

[Cru328prod]

the wood grain in my car has tons of swirl marks, and really fine scratchs. has anyone tried to refinish them, or happen to get the swirl marks out

[Logic]

depending on the thickness of the clear on your panels you might be able to wet sand it and have it re buffed i bet most paint shops can tell you if its possible but it might cheaper to buy a new panel

[audiophile]

i have re-finished mine. i tried to buff them out, but to no gain.
so i just re cleared mine. i used a clear lacquer spary. from home depot about $5 bucks. sparayed it let it dry about a day cause it needs to harden. wet sanded with 1500 grit and polished and it looks great. ;)

[Cru328prod]

i don't think thats the cheaper way logic, no1 really wants FAKE CARBON FIBER LMFAO. im really iffy about lacquer spray........i never have luck with them. There not deep i can tell you that much. Do you have any pics.............also how did you get that dash pannel apart.........everytime i try it seems like its going to crack.

[Logic]

i would take fake carbon over that wood any day LOL give it some years and it will start cracking LOL and stop being cheap on me LOL

[Cru328prod]

my car isn't sport enough, its sleeps!!!

[Logic]

well then you better wake it up :bunny:

[tinter101]

Search for a thread called "custom blue CF dash" there might be some helpful info in there. You can do water transfer printing in any color under the sun.

[rman]

you could try Novus 1.2.3, it's a 3 step polishing for acrylic, used a lot on aquariums. That would probalby get all the little swirls out