PDA

View Full Version : CLK Sway Bars



C280/////AMG
11-16-2007, 09:40 PM
As an attempt not to hijack RemoLexi's thread on the ML's Sway bar, Can anyone find out if the CLK's Sway bars fit the 202? (as they share the same chassis). I assume that they'd be stiffer than the 202's

Please, if anyone has access to this info, i think we'll all be grateful!!

RemoLexi
11-18-2007, 11:55 PM
ill take a peek under a W208 at work, maybe grab a P/N off the sway bar.

benzboy
11-19-2007, 10:18 AM
MM, W208 CLK55 AMG Sway kit could be cool

C280/////AMG
11-20-2007, 04:51 AM
Originally posted by benzboy
MM, W208 CLK55 AMG Sway kit could be cool

My thoughts exactly... :cool: :cool: :cool:

Thanks RemoLexi!

While you're at it, could you measure the diameter of the front sway bar if one comes into the workshop? Much appreciated

RemoLexi
11-20-2007, 08:11 AM
yea, that wont be a problem, just letting you know a CLK320-CLK55 may all share the same swaybar!

RemoLexi
11-20-2007, 08:56 PM
W208 CLK320 shares exact same front sway as a 95' C280.

I saw both cars on the lifts today and the 208 had a W202 P/N stamped on the sway.

Len013091
11-20-2007, 08:59 PM
SO, does this mean that the W208 gets the sways from the W202, therefore meaning that there are no larger sizes for us from that car?

OzC36
11-21-2007, 04:39 AM
Just had a quick look at Detali site. There were some earlier part numbers that were superseded. But, it would seem that the following later part numbers cover all the W202 C280, C36 & C43 and W208 C320 & C55:

202 323 43 65 W202 C280, C36 & W208 CLK320 (early models only)
202 323 56 65 W202 C280, C36 AMG
202 323 52 65 update W202 C280 & W208 CLK320
202 323 50 65 W202 C43 AMG & W208 CLK55 AMG

There might be some after-market parts available as well.

Edit: Yep. Just found Eibach have an anti-roll kit:

http://eibach.com/cgi-bin/htmlos.exe/03265.3.3518105410900001904?

C280/////AMG
11-23-2007, 11:18 PM
Originally posted by RemoLexi
W208 CLK320 shares exact same front sway as a 95' C280.

I saw both cars on the lifts today and the 208 had a W202 P/N stamped on the sway.

Damn, that's disappointing... Thanks Remo

Oz, thanks for the part numbers...only problem is i can't order them part by part and measure them cos my dealership has a no return policy on ordered parts, so there's no way me ordering them without taking it.

thanks for the eibach site...i knew about those...the only thing is they cost an arm and a leg.

jnolte
11-24-2007, 03:46 AM
Originally posted by OzC36
Just had a quick look at Detali site. There were some earlier part numbers that were superseded. But, it would seem that the following later part numbers cover all the W202 C280, C36 & C43 and W208 C320 & C55:

202 323 43 65 W202 C280, C36 & W208 CLK320 (early models only)
202 323 56 65 W202 C280, C36 AMG
202 323 52 65 update W202 C280 & W208 CLK320
202 323 50 65 W202 C43 AMG & W208 CLK55 AMG

There might be some after-market parts available as well.

Edit: Yep. Just found Eibach have an anti-roll kit:

http://eibach.com/cgi-bin/htmlos.exe/03265.3.3518105410900001904?


i honestly dont think there are any eibach sway bars left

OzC36
11-24-2007, 05:10 AM
These guys indicate that they may have some stock?

http://www.ajusa.com/cgi-bin/stores/products?vendor_code=EIB&category_id=ef42e8e7cc9c7eaa4d83e9d4c2422750&session_id=30a9d0668b3cc62a1fbc4b653627e224#catego ry_lookup

C280/////AMG
11-24-2007, 11:48 PM
I know for a fact that Eibach south africa has a couple of sets left...they're just out of budget. (between $600 and $700, dependign on exchange rate...