C-pillar bubbling!

[RemoLexi]

I still have issues with the interior of my car,

first, to start it off I bought the car with a purse-like Gucci interior (shitty instal as well)

Gucci crap was ripped off and I used 3M spray adhesive to apply suede.

suede = EVEN SHITTIER!!

this material gets ruined as soon as it touches the glue (if too wet) so it looks like cigarette burns almost everywhere. second, water fucks it up. 3rd, the spray adhesive ISNT HOLDING IT !!

so after all this time ive been laying this off but my eyes are getting sick of seeing all the flaws!! I really wish I had OEM 202 interior!!

now, I am going to give it one last shot before I start to invest in a complete set of new door panals and ABC pillers. :mad: :mad: :mad:

-what material do you guys recomend? (easy to clean/apply/cut out)
-what kind of adhesive (3M spray can shit aint holding!!)
-Where can I get some REAL supplies (not grandma store supplies)

I am very irratated right now, I tried to redo to C pillars and its a total ass reamer!! just nasty glue everywhere and I dont have the patience

[RemoLexi]

sorry for all the spelling errors. im half asleep.

[515]

try the leather, easy wipe easy clean.
:)
the synthetic leather is good enough since is cheaper.
mine use suede all around, with no problemo. since i ask the shop to do the job for me. I'm juz tooo lazy & inpatient :D
the are some stitches on curvy surface as the suede wouldn't stretch

[mazdalowandslow]

I have used 3m in a lot of interrior installs. Its sounds like you are applying the materal to fast after spraying the 3m stuff. You need to wait for the glue to tack up. Also i would suggest if you are doing a full interrior, I would use a glue spray guy, you get better spray patterns. You also need to spary the back of your material and the surface you are applying to. Let the glue sit for a few min tell it becomes really tacky. Pm me if you have any questions.

[RemoLexi]

whats a glue spray guy ? lol

[Cru328prod]

hahaha remo 1 word........FIREFOX lol


I was told you spray one side and the other u want it to adhease to......wait a few sec's then lay.

i say fuk it........golden valour everything ......get the seats done in diamond pattern too;)

[aruba]

i used the 3m trim adhesive its the best thing and ive had my headliner on for a couple of years now no problem and i used this pastel vynil the secret is to spray both sides wait at least 20 min then apply them together for suede try holding the spray can a bit farther ive had that same problem but by sparying a light coth on the suede you will have better result just got to be a little patient here is my headliner a b and c pillars hope this helps

http://www.club202.com/forums/showthread.php?threadid=7575&highlight=headliner

[mazdalowandslow]

heres a link to the glue spray gun i have used.

http://cgi.ebay.ca/CRITTER-118-SIPHON-GUN-PISTOLET-SIPHON-118_W0QQitemZ200137748078QQihZ010QQcategoryZ26228Q QtcZphotoQQcmdZViewItem

[predrag1]

c230 parting out in sac

heres the link, maybe you can get spme stuff you need

http://sacramento.craigslist.org/pts/501073731.html

[Cru328prod]

wtf u can't even buy an engine for that price......i want the shift knob if u get it lol

[RemoLexi]

I called her and left a message.

not sure if she wants to sell the whole car or what not but if she does try and sell the whole car ill take it!