Has Anyone Used This Wheel Fitment?

[ludachris]

Car:
1999 C43
Lowered aproximatley 2.3" in front and 2" in rear with H&R Cup Kit (springs and shocks) and #1 pads all around.

Wheels:
AMG 5-Spoke Style III Sakks 5th Ave from 2008 E-class

Wheel Specs:
Front: 18 x 8.5 ET 38
Rear: 18 x 9 ET 39

I really want to buy a set of these wheels but I dont want to get them and have them not fit! Has anyone on this board ran this size wheel with this offset? Anyone with the same ride height? Does anyone know if this will fit with my ride height or even at all??? PLEASE HELP!

http://i35.photobucket.com/albums/d165/ludachris867/3d5f_12.jpg

[OzC36]

ETs look wrong for W202. Check below:

http://www.alloywheelsdirect.net/information/fitting_chart/mercedes-benz

[lamf]

i'd have to agree

[OCKlasse]

I'd have to disagree. My wheels are 19 * 8.5 ET40 and 19 * 9.5 ET 38. They'll fit. You'll need different lugs probably, though.

[ludachris]

Originally posted by OCKlasse
I'd have to disagree. My wheels are 19 * 8.5 ET40 and 19 * 9.5 ET 38. They'll fit. You'll need different lugs probably, though.

How much work have you had to do to your fenders/wheel well?

[lamf]

i meant disagree with the wheel choice.

[JRE320]

The wheel is not that bad.. ;)

[chaddeus]

I've had my eye on that type of wheel for a while. I've always liked the look of a 202 on the AMG slim 5-spoke and this looks like an updated version.

[OCKlasse]

Originally posted by ludachris
How much work have you had to do to your fenders/wheel well?

Rolled/pulled front fenders, but then again, this was my ride height:

http://img.photobucket.com/albums/v373/trefiveincognito/C230/July%2006/LineaLarge.jpg

[515]

No problem at all on the offset.
should get the 19" instead of 18" :D

[ludachris]

[QUOTE]Originally posted by OCKlasse
[B]Rolled/pulled front fenders, but then again, this was my ride height:

About how low are you? tire size? what suspension/pads are you running? how much did it cost you to pull the fenders?

[ludachris]

Originally posted by 515
No problem at all on the offset.
should get the 19" instead of 18" :D

i thought about that but i decided on the 18s cause i wanted very minimal rubbing...no rubbing would be awesome...also tires for 19's are more expensive...and my car is so low that the tire wear would be really uneven...