What is the correct name?

[Cru328prod]

What is the correct name for the pcv valve?

[Denlasoul]

Positive Crankcase Ventilation valve.

[Cru328prod]

now this is below the intake manifold correct?

Anyone have a part number?

Cause when i call they don't even know what that iso

[xvvvz]

"M.B. Doc" on another forum replied to a similar question that I had posed with:

"PCV valve is a PAIN to get to! Between the engine & intake...MB part number 111-010-00-91."

[Cru328prod]

ok $16bucks......now i need part numbers for all the tubing...they some what dry rotted, i touched 1 pieced and it broke!

[benztec]

what year car and model did they rot on?

[SLAMMED_C]

Originally posted by Cru328prod
ok $16bucks......now i need part numbers for all the tubing...they some what dry rotted, i touched 1 pieced and it broke!
Im not sure the P/N on that rubber hose that goes from the head to the pcv valve.. I would be able to tell you tomorrow night. but it comes as one length.. you just cut in half and then use the 2 pieces from the pcv valve to the head, below the intake manifold.
Id recommend removing the intake manifold (or just kind of moving out of the way when unbolted) and clean the spots in the head where the tubes connect to.. they tend to plug up.

[Cru328prod]

99 c230k


this thing happens offten from what i've heard, so when i went to check it out......bam snapped off...someone told me you don't even need it.......i did notice alot of oillllll and dirty so i figured it needed to be replaced....so i'll do a write up if i can get a camera soon.

Yes please let me know part numbers.......i've called MB of Fort myers and they didnt know wtf.


I'm also having idle problems recently...the car will "ghost ride the whip' on me...and if i drive around and then put it in park...it starts to rev as if i was pressing the peddle....linkage is fine...not hearing exesive humming from the t body...but that doesn't really mean shit...i did do a t body clean, took it apart, lubed the gears..and cleaned the insides a bit..no help...i'm thinking TPS

[stox]

Originally posted by Denlasoul
Positive Crankcase Ventilation valve.

AKA Pollution Control Valve. Positive Crankcase Ventilation valve is more correct, though.

[SLAMMED_C]

Originally posted by Cru328prod
99 c230k


this thing happens offten from what i've heard, so when i went to check it out......bam snapped off...someone told me you don't even need it.......i did notice alot of oillllll and dirty so i figured it needed to be replaced....so i'll do a write up if i can get a camera soon.

Yes please let me know part numbers.......i've called MB of Fort myers and they didnt know wtf.


I'm also having idle problems recently...the car will "ghost ride the whip' on me...and if i drive around and then put it in park...it starts to rev as if i was pressing the peddle....linkage is fine...not hearing exesive humming from the t body...but that doesn't really mean shit...i did do a t body clean, took it apart, lubed the gears..and cleaned the insides a bit..no help...i'm thinking TPS

okay.. part number for the rubber hose from the top of the pcv valve to the head.. A002 094 01 82. it comes as one length.. so all you do is cut it in half and you have 2 pieces the proper length.
I dont know about the par that the bottom of the pcv valve goes into. Ive never had to replace that part. is yours rotted n brittle?

[Cru328prod]

yup rotted....and alot of dirt and oil on the side of the hose...lookon your car

[SLAMMED_C]

Originally posted by Cru328prod
yup rotted....and alot of dirt and oil on the side of the hose...lookon your car
ill try and find a part number for you tomorrow.

[Cru328prod]

thanks bro

[SLAMMED_C]

okay brotha... the hose that the bottom of the PCV valve goes into is P/N- 111 018 15 82.

[Cru328prod]

haha yes..........thank you alll for the information, i'll do a right up as soon as i'm done!

i think it should be a sticky when i'm done