the car ain't pulling like it use to!

[Heinz]

Hey, as some of you might know, I installed a amp & sub into the 202... I took off the battery for the installation and when I finished installing everything then went for a drive around town.. but the car doesn't pull like it use to... it takes awhile for it to switch gears and pull. I didn't have this problem before.. is it because I took out the battery (did I reset something in the computer)?? what shall I do... ??

Thanks for reading.

[Pagz]

Thats what happens when you install sounds,not only does it wiegh a ton but it sucks your alternator dry too:p jks

I think some of the autos have that driver learning function,so it might just take a few days to come right again!,it is unlikley removing the 12v will have caused any other problems apart from basic settings.

Cheers,
Paul

[jnolte]

yes you reset your transmission when you unplugged the battery, give it a day or so of fast driving and it should correct itself

[Heinz]

alright thanks guys :D

[SLAMMED_C]

but im gonna say that adding the weight of a sub.. sub box and amp wont help too much with acceleration!!
hopefully things work out.

[Cru328prod]

lmao ummm is it on winter or sport mode? i had the same problem

[Heinz]

Lol Yea it was on winter mode

[Cru328prod]

lmaoooooooooo well switch on sport thennnnnnnnnnnn

[Heinz]

Originally posted by Cru328prod
lmaoooooooooo well switch on sport thennnnnnnnnnnn


ahahah I will...thanks man

[bakuma86]

It's actually "S"tandard and "W"inter mode. In standard mode the tranny starts in gear 1 but in winter mode it starts in gear 2. This was a design from MB to help drivers keep from having the tires slip on slippery conditions