door card help

[zmatt]

maybe someone can help me with getting these secured. The door card/panels on the rear doors have come unstuck. Not the entire door, but just the small leather and wood bit above the door handle. It looks like the green glue they used on it has crapped out. I have tried using several different kinds of tape (duct tape, double sided, gaffer) and it will maybe hold for one or two shuts before they flop out when I shut the doors.


Picture with a not screwed up door for reference

http://i80.photobucket.com/albums/j185/mbwhite/202door.png

[emilli230k]

I have the same exact problem on the same exact door as you haha. Anyone have some insight to this problem?

[zmatt]

I ended up getting some really strong double sided tape and sticking three layers together and using that. it worked for about two months, until it got cold and the adhesive failed.

[Yujin]

Omg, taking the door interiors off suck! Take it from me, I had to take all 4 off to put in the OEM CF trim. You have to unhook all the things, but the door handles on the inside have to come out gentley (I snapped all the pins on mine and had to glue them :( )...
http://www.youtube.com/watch?v=oq8kf6QRX0s

Almost the same, except for the door handle piece (inside) which has to be removed carefully or you will break clips. I used a flathead to do this, no beuno but it got the job done. I would research more into it as you can damage your surfaces.

[zmatt]

The clips were already broken when this happened, that's why they fell off to begin with.

[nelius]

the wood bit on my driver side door too! So annoying. I glued it which worked for like 2 months