zmatt
11-16-2011, 10:46 AM
I was able to dig up the specs for the uber-rare schrick cams like Gakz has. They don't make them anymore and were hard to get when they were made, but you can have your cams sent to a shop and have them reground to spec for the same effect.
Specs:
Cam lift
(Valve lift) ----------------------- 10,3
I / E [mm]
Duration °CRA
Intake/Exhaust----------------264/ /120-100
Peak Timing----------------------(112)
Valve timing
°CRA--------------------------12-72 - 32-52
IO-IC-EO-EC -----------------------(20-64)
Valve
lift at -----------------------------0.3-2.3
TDC-------------------------------- (1.0)
I / E [mm]
Valve
clearance --------------------------hydr.
I / E [mm]
Valve spring retainer,
accessories------------------------------tappet 0863 13 801
Looks like you need to use a different tappet, don't know if its required though.
EDIT: stupid board forced me to put dashes in or it would smash the specs together.
Specs:
Cam lift
(Valve lift) ----------------------- 10,3
I / E [mm]
Duration °CRA
Intake/Exhaust----------------264/ /120-100
Peak Timing----------------------(112)
Valve timing
°CRA--------------------------12-72 - 32-52
IO-IC-EO-EC -----------------------(20-64)
Valve
lift at -----------------------------0.3-2.3
TDC-------------------------------- (1.0)
I / E [mm]
Valve
clearance --------------------------hydr.
I / E [mm]
Valve spring retainer,
accessories------------------------------tappet 0863 13 801
Looks like you need to use a different tappet, don't know if its required though.
EDIT: stupid board forced me to put dashes in or it would smash the specs together.