Tensioner bearing

[taz069]

Here we go. The # on the pulley is 1470/a119/200 it is right at 93mm in diamater=the 92 mm sold. I just need to replace the inner bearing! Here is the info that i have. It is stamped on the rubber casing(not all #'s and letters can i read) INA GERMANY 3202-2r3-a__G0___. I can't make out the _'s. Also the inner shaft is stamped AH 13. Now for the diamentions. Inner is 14.85mm, .585in. Outer is 34.91mm,1.374in. I really don't see the sense in spending 60 bucks on a complete assembly when the bearing is all that is going bad. Any help is greatly welcome again.

Thanks

[W202FTW]

Year, model and engine plox. I have a subscription to EPC-online.

[taz069]

Sorry it's a 96 c280 and it has the inline 6. Vin#wdbha28etf312140 . Hope this helps!

[W202FTW]

Sorry it's a 96 c280 and it has the inline 6. Vin#wdbha28etf312140 . Hope this helps!

Sorry bud, all I could pull up is the whole assembly with that code: A119 200 14 70
Doesn't look like you can get the inner bearing by itself. Might want to try other sources.

[taz069]

Thank you for your time w202! I found a 92mm pulley on e-bay for 30 bucks shipped. Just waiting for delevery. Thank you again.

[koko202]

it should be a 3202 bearing any auto parts store should have these.