PDA

View Full Version : C230k Parts



Mike51809
02-08-2014, 03:02 PM
I have the oe manifold for sale as well as my magnflow tip, vibrant bottle resonator, magnaflow catalytic converter, and borla pro xs muffler.
1928

Mike51809
02-08-2014, 03:06 PM
1929193019311932

Tips-$30
Cat-$30 still like new, only used a month
Borla Pro XS muffler- $50 only used a month
Vibrant 18" resonator- $20
Stock m111 manifold- $50

wichipong
02-08-2014, 11:42 PM
glws!

Mike51809
02-09-2014, 05:55 AM
Thanks wichi

thejewwhale
05-07-2015, 08:31 AM
Still for sale?

Mike51809
05-15-2015, 07:51 PM
What are you looking for?

Pocketzest
11-26-2015, 03:41 PM
Interested, still for sale?

Mike51809
11-29-2015, 09:15 AM
A lot is gone, what are you looking for?

Chisel86
12-01-2015, 06:52 AM
Which pieces do you still have? I'd be interested in the cat and the muffler can.

vaspen
12-04-2015, 04:21 PM
hey you wouldn't happen to have a head laying around would you ? I wana dive into some port polish valves ect ect be way easier if I had a spare head to work with
00 c230 btw mike on a cold night that header .... zomg.... weeeeeeeeeee

Mike51809
12-12-2015, 07:34 PM
I have the cat still but that's about it.. Don't have a head vaspen, but that header definitely sounds good

vaspen
12-13-2015, 04:39 AM
U got anything els for sale Mike ?

Mike51809
12-13-2015, 09:26 AM
I have 2 manual shifters for the 202. Works with a slk trans too. Have my C36 trans, flywheel, pedals, shifter for the auto. Have some AMG 2 piece wheels I'm gonna put for sale.

Mike51809
12-13-2015, 09:26 AM
2 C36 air box lower sections in good shape, top halves are rough

vaspen
12-13-2015, 10:17 AM
U have the manual transmission? Or just the shifter gate

Mike51809
12-14-2015, 06:43 AM
I have one with third gear blown up but otherwise just the shifters lol

vaspen
12-14-2015, 10:45 AM
How much ?

vaspen
12-14-2015, 10:45 AM
How much ? As long as it will fit the 202 c230

Mike51809
12-14-2015, 10:56 AM
For a shifter? Or a blown up trans?

vaspen
12-14-2015, 11:37 AM
Trans

Mike51809
12-14-2015, 12:02 PM
You would have to add some length to the trans cross member and the driveshaft. Mounts like a 124 or a 201. Slk trans will bolt right up for mounting at the rear. You would have to extend the driveshaft that way too

vaspen
12-14-2015, 12:15 PM
What's the tranny off of

Chisel86
12-14-2015, 02:15 PM
I bet you're tired of questions, lol
What are the wheels that you speak of??

Mike51809
12-16-2015, 05:54 AM
Tranny is from a 190e 2.3. It's a 717.411 with the short input shaft. The wheels are in my other post