vaspen
03-07-2014, 03:22 PM
etc-
code 65 component n15/3 (etc[egs] control unit) is faulty -stored code
code 116 component y3/6b1 (starter lockout contact ) is sporadically faulty or both -stored code
code 130 can communication with controle n15/5 electronic selector lever module controle unit is sporadically disturbed
code 132 can com^ with engine sys is sporadically disturbed or engine temp is sporadically implausible
code 134-135-136-148
all stored (im giving up writing all codes discriptions lol)
-esm
code p1817-003 no volt at terminal 15 for revers light ?
p1856-005 slector lever position detection has failed
both stored codes
me2-sfi motor electronics 2
code
p0170-22 (self adaption mixture formation me-sfi controle module (n3/10) part load for right bank of cyls at limit value
p0136 g3/6 (right o2 sonsor, after twc
^current/stored
esp electronic stability program
codes c1012/c1020/c1022-002/c1024/c1031/c1200/c1149-002/c1140-004
/c1140-64/c1140-128/c1140-001/c1140-002/c1140-016/c1202 (all are just stored codes)
bas- brake assist
code c1025-001/c1025-002/c1025-004/c1025-008 (all stored )
ab- airbag
code 27-000 falt in communication with component b48(front passenger seat occupied and child seat recognition) or there is a cable fault (current)
3-032 ab controle unit: terminal 15r has undervoltage or over voltage (stored code )
2-004 a1e15(airbag malfunction indicator and warning lamp (current)
ocp
b1010/b1011
(stored)
ezs
b1156-005/b1010/b1011/b1021 (stored)
ill take piks later showing all the data for these codes but this is all that came up
he said my maf and lower 02 wasnt getting a reading because my intake and exhaust are modified
so now I presume my issue lies within those 2 so ima amazon the o2 sensors and maf for 260 anyway but can anyone els give me insite on the airbag issu ?
code 65 component n15/3 (etc[egs] control unit) is faulty -stored code
code 116 component y3/6b1 (starter lockout contact ) is sporadically faulty or both -stored code
code 130 can communication with controle n15/5 electronic selector lever module controle unit is sporadically disturbed
code 132 can com^ with engine sys is sporadically disturbed or engine temp is sporadically implausible
code 134-135-136-148
all stored (im giving up writing all codes discriptions lol)
-esm
code p1817-003 no volt at terminal 15 for revers light ?
p1856-005 slector lever position detection has failed
both stored codes
me2-sfi motor electronics 2
code
p0170-22 (self adaption mixture formation me-sfi controle module (n3/10) part load for right bank of cyls at limit value
p0136 g3/6 (right o2 sonsor, after twc
^current/stored
esp electronic stability program
codes c1012/c1020/c1022-002/c1024/c1031/c1200/c1149-002/c1140-004
/c1140-64/c1140-128/c1140-001/c1140-002/c1140-016/c1202 (all are just stored codes)
bas- brake assist
code c1025-001/c1025-002/c1025-004/c1025-008 (all stored )
ab- airbag
code 27-000 falt in communication with component b48(front passenger seat occupied and child seat recognition) or there is a cable fault (current)
3-032 ab controle unit: terminal 15r has undervoltage or over voltage (stored code )
2-004 a1e15(airbag malfunction indicator and warning lamp (current)
ocp
b1010/b1011
(stored)
ezs
b1156-005/b1010/b1011/b1021 (stored)
ill take piks later showing all the data for these codes but this is all that came up
he said my maf and lower 02 wasnt getting a reading because my intake and exhaust are modified
so now I presume my issue lies within those 2 so ima amazon the o2 sensors and maf for 260 anyway but can anyone els give me insite on the airbag issu ?