For sale: LPD's Polyurethane LCA bushings

[Denlasoul]

Likely going to put these up for sale. They are poly LCA bushings that are sold by LPD Auto Parts. They are currently listed at $100 for a pair. I am selling mine for $80 shipped to the lower 48 USA.

[wichipong]

this is for where?

[Denlasoul]

Lower Control Arms. The stock bushing is a metal sleeve with a rubber bushing inside, but there are rubber connectors that are used to mount them to each other. A solid poly bushing will replace that OEM bushing and provide a better, more solid connection.

I can post a pic of the OEM and Poly side by side tonight.

[Denlasoul]

Ok, going up for sale.

[Denlasoul]

These gotta go. $60 shipped in the US. May consider other countries.

Anyone?

[Edwin28]

You still have the bushings? You have both set left and right?

[Denlasoul]

You still have the bushings? You have both set left and right?
Still have them. The set is left and right. The OEM consists of 3 bushings total per side, one larger bushing, and a 2-piece. These polyurethane bushings replace only the large OEM bushing bc it fails often/prematurely due to its design. The 2-piece does not have to be replaced.

I can send you another picture tonight describing what I wrote above.

[svt ricco]

May I ask what made you decide not to put it on?

[Edwin28]

Idk but I have em in my car. And turn out they aren't good!!! I have vibration and my steering wonder or pulls sometimes. And I replaced tie rods linkage assembly complete and did alignment and still pula while I turn. im in the process of going back to the stock one. But but I'm gonna get the w208 bushings they are the same but they are more Solid!! And better design. .

[Chisel86]

Is this for the rearmost bushing on the front LCA? Where the OEM one has the rubber "spokes"?

[Edwin28]

yeap..

[Chisel86]

What is the w208 one? Since they have a different front LCA design, which one do you use?

[Edwin28]

Heres The difference http://i215.photobucket.com/albums/cc292/ebencosme/Mobile%20Uploads/2015-09/BFBF93BC-21EB-4DEA-8C44-98ABEA069025_zps0hchvz8o.png (http://s215.photobucket.com/user/ebencosme/media/Mobile%20Uploads/2015-09/BFBF93BC-21EB-4DEA-8C44-98ABEA069025_zps0hchvz8o.png.html)

[Denlasoul]

Interesting. I have not heard of any complaint from anyone who has changed out the OEM bushing to a solid polyurethane one, regardless of brand.

As for the question above, I am going with an adjustable bushing.

[Edwin28]

i try going adjustable but I couldn't find any bushings. No luck here.

[Denlasoul]

i try going adjustable but I couldn't find any bushings. No luck here.
Only ones I know of are kmac in Australia.

[djjs]

Knowing this is almost a year old, but are they still for sale?
I am located in Taiwan, not Thailand. Taiwan, the aircraft carrier shaped island beside China.
Wonder how much can have them shipped if they are still for sale?

Modding resource is rather limited here, especially for a model that's 15 years past since discontinued.

[kowalski]

Knowing this is almost a year old, but are they still for sale?
I am located in Taiwan, not Thailand. Taiwan, the aircraft carrier shaped island beside China.
Wonder how much can have them shipped if they are still for sale?

Modding resource is rather limited here, especially for a model that's 15 years past since discontinued.

I sent you a pm, check your inbox

[Denlasoul]

Still for sale. I could work something out with you. PM me.