95 C280 AC Diagnostics

[HoodStar]

With more than 200K miles, Betsy has a few issues. Among them AC. Last year the compressor seized so I've replaced the drier, suction hose and expansion valve with new parts and the compressor was replaced with a used one.
Had the system filled about 2 weeks ago and got cold air but the blower was not working. Replaced the blower with a used one which blows strong but now the air is no longer cold.
I ran the diagnostics from the push button CCU and it appears, if I'm reading this correctly, the compressor is not engaging. The codes are posted below. Can anyone here help me decipher these codes and lend some insight as to what may be the issue.
Thanks. Jay

01 108
02 93F
03 166
05 102
06 183
07 00 0
08 450
09 03
15 HI
20 02
21 07 0
22 00 0
23 00 0
50 10 0
51 00
52 00

[mbsickness]

Looks like all your refrigerant leaked out. 07 is pressure in Bar and yours is reading 00 0

[HoodStar]

Thanks sickness. I'll have a leak test done friday. If it's the evaporator Betsy may be done. Thanks again.

[mbsickness]

If it turns out to be the evaporator I would try the sealants they have out on the market as you have nothing to lose at this point.

[HoodStar]

So the AC dude says there's a pinhole in the hose & quoted $200 to weld it. Think I'll just replace it with a used part for now & at least make it through the summer.

[RemoLexi]

I would strongly advise against any sealants. They clog up ac machines when evacuating your ac system. A new ac machine is roughly $4k.