PDA

View Full Version : 99 c230k ac problems



koepfsm
08-18-2015, 01:39 PM
OK , so my ac won't blow cold , at first when I looked at it the compressor clutch was not engaging , so I ran a wire from my battery to the compressor and it engaged no problem , so next i tried putting freon in cause it looked low ( just below 25 psi ) but the system would not take any. So here I am lost now , what should be the next place I look at ?

dpc004
11-04-2015, 09:08 AM
Do you have access to a vacuum pump? If so, try vacuuming the system first (there is a recommended negative pressure that you can't exceed, I think it is 7 inches of vacuum) and see if the vacuum holds. If it doesn't, you have a leak and you'll have to find it and fix it first. Otherwise the Freon will leak back out. The compressor may have been disengaged automatically by a safety switch to "protect" it from a low Freon condition.

dpc004
11-04-2015, 09:12 AM
Here is the link I was trying to reference:

http://www.autoacforum.com/messageview.cfm?catid=20&threadid=7931