My new wheels

[MG420]

http://www.club202.com/forums/showthread.php?s=&threadid=2094

19x8.5 F 19x10 R iForged Evolutions , just to clear up any confusion my friend put 19x9 F by accident. I will take some more pictures later when i finish up the car. I still got a few things im doing to it like my fogs that im missing , exhaust , avantgarde grill and some body work. Let me know what u guys think so far.

[jnolte]

Now this may be kinda confusing but let me put it as easy as possible.


I see how you have that fatty 3 inch lip in the back, I want that kinda lip on my next rims. NOw how do you get that lip. Is it the brand of rims or what? Like with Carlssons or Amg rims persay, If you have 18x8 front there wont be much lip there but in the back with 18x9 there is a bigger lip. So the wider the rim the fatter the lip or what? Or is it the offset? I am so confused on rims can someone clear this up. I dont wanna run 19s so does this mean i cant have the fat lip. i want 18x8 front and 18x9.5 or 10 rear, what kinda rims can i get that have this? maybe some one who knows alot about rims can tell me, i saw a G35 at a car show that had racing hart C4s on it with a fat 4 inch lip, but they were 19s. Do they only do this on 19s or on 18s too?

thank you for your help i know its kinda confusing

[Renn 208]

good reading lies in wait for you here:

http://www.tirerack.com/wheels/tech/wheeltech.htm

[jnolte]

thanks renn

so basically a rim with a higher negative offset will have a deeper dish? what companies do this? Besides Iforged and HRE and BBS?

[Renn 208]

Originally posted by jnolte
thanks renn

so basically a rim with a higher negative offset will have a deeper dish? what companies do this? Besides Iforged and HRE and BBS?

Any company that you can convice to make something to a spec you specify...

[J Irwan]

Originally posted by jnolte
thanks renn

so basically a rim with a higher negative offset will have a deeper dish? what companies do this? Besides Iforged and HRE and BBS?


alot of company tuner like Brabus, Carlsson, MAE, Lorinser also have deep dish wheel


but the problem is that the application

Normally bigger car would have the selection of deep dish rear wheel..

since C is more compact these company make some generic offset so that people don't have too much trouble trying to fit the wheel on their car..

that's why
companies like iForged, HRE, Kinesis, Fikse, Zauber (japanese company), wheelworks (japanese company), and a lot more...
sell their wheel at premium price
because you could ask exactly the offset to your need (custom offset)


BBS don't make custom wheel to my knowledge...


Regardz,

[jnolte]

hmmm thats not cool, so i need to go custom offsets= BIG BUCKO BUCKS!!!

can someone explain a 18x9 et 35 will not have that deep on dish like 1 inch


will a 18x9.5 or 10 et 30 or 28 will that fit on a c-class on the rear and how deep of lip do you think like 3 inch?

[J Irwan]

Originally posted by jnolte
hmmm thats not cool, so i need to go custom offsets= BIG BUCKO BUCKS!!!

can someone explain a 18x9 et 35 will not have that deep on dish like 1 inch


will a 18x9.5 or 10 et 30 or 28 will that fit on a c-class on the rear and how deep of lip do you think like 3 inch?


man....

read the concept of OFFSET at tirerack website

then try to skecth on the paper to undertstand it...
then if you're still don't understand then you ask..



Regardz,

[jnolte]

my bad..

[JRE320]

I can help you out on the rims that you wanted. Except it's Japanese made rims. ;)

[jnolte]

Originally posted by JRE320
I can help you out on the rims that you wanted. Except it's Japanese made rims. ;)


dont matter to me, just as long as they arnt cheap cheesy or crap. I am just looking for a german looking rim with a nice deep lip

[DougandhisC280]

Is this (http://forums.mbworld.org/forums/showthread.php?s=&threadid=16025&perpage=10&pagenumber=5) deep enough for you? I'm selling them for $250.00 for the set. 16 X 7.5. Because of the design they look much bigger than 16's.

[jnolte]

Originally posted by DougandhisC280
Is this (http://forums.mbworld.org/forums/showthread.php?s=&threadid=16025&perpage=10&pagenumber=5) deep enough for you? I'm selling them for $250.00 for the set. 16 X 7.5. Because of the design they look much bigger than 16's.


man those look like some knock off carlsson 1/5s lol

[98c43amg]

Originally posted by MG420
http://www.club202.com/forums/showthread.php?s=&threadid=2094

19x8.5 F 19x10 R iForged Evolutions ...

(yes, I know this thread is a year old...) MG420, that link above is no longer active. Could you post a current link to pictures of your car with iForged wheels?

Thanx much.