E wheels for C class

[1998K]

On C Class, stock 205/55 are foreseen on 16" ET37 with 7" width. I'm ready to buy 4 used alloy wheel 16" from an E Class.

On E Class 16" are 7.5" width with ET41.

Please confirm me it'll be OK.

Please don't say me...go for 17"

thanks guys

[manny]

If it helps you any, I run 16x7.5 ET 35, on my C 230 K, and there is tons of room to spare.
The extra 4 mm really should'nt be a problem.
Worst case scenario.....you could always use 5 mm spacers. ;)

[1998K]

thanks a lot Manny.

A man that work on MB said me also to verify possible interference with brake devices!?

Really I do not think this can be a problem.

[max2105]

I have both an E class and C class cars. The C's won't fit on the E's because of the larger brake caliper. However, you should have no problem fitting E class wheels into a C Class car. Front brake calipers will have plenty of room to spare.

[pnsji]

unless you have AMG brakes, because the caliper is pretty big. This is why AMG put 17" wheels to clear the brake.

[1998K]

Thanks a lot Guys.
I'm still looking for a MB replica wheels or for some used 16" original MB wheels.

Unfortunately it seems to be quite difficoult to find here used wheels at a decent price. Also 8 hole wheels in 16" from an E class will be fine for me.