Parts to be release

[MRP Motorsports]

MB camber Kits. Currently under testing for release next month. Your comments are welcome. Objective is to satisfy and combine the benefits of both the performance and ride quality issues, along with greater range of adjustment. More camber adjustment than adjustable bushings, ride quality of OEM arms, ease of adjustment for track days, and within the budget of even the full time college student. I think I dun it . Your objective review is welcomed. I am also looking for dealers around the country.

http://www.mrp-engineering.com/images/MRP_New_Camber_Kit.JPG

[Rocky]

Nice MRP.

I got the rears, just need some front camber adjustment action going, maybe some poly U lower control arm bushings :)

[ruffino28]

will that fit 95 c280????

[MRP Motorsports]

Originally posted by ruffino28
will that fit 95 c280????

They will fit "W" - 124, 201, 202, 203, 208, 210 chasis.

[moebiusgold]

Probably a dumb question because I'm too lazy to look at my rear suspenson, but how come the tube is not centered on the ends?

[MRP Motorsports]

Originally posted by moebiusgold
Probably a dumb question because I'm too lazy to look at my rear suspenson, but how come the tube is not centered on the ends?

Good question.

It is there for rear sway bar clearance and proper geometry. If you look at the OEM arm it is too off center for the same reasons. You are OK with most OEM bars but when you get a lot of travel going or run fat bars it may present a clearance issue. This only presents itself in a one size fits all situation on commercial parts.

[moebiusgold]

Hmm, I sure like what I see. Looks like you are going to get more than a brake line order from me. So what's the Club 202 price and how long is your test period going to be?

[MRP Motorsports]

Originally posted by moebiusgold
Hmm, I sure like what I see. Looks like you are going to get more than a brake line order from me. So what's the Club 202 price and how long is your test period going to be?

The pricing is going to $150.00 a set for the forum or Jobber Rate.

Testing will last until the end of February when production begins. The deliveries are expected to be in March and will go to dealers and distributors first to fill open orders.

Here is the bone:

I am currently looking for dealers. Here is the deal. All dealer referals which purchase a minimum of 10 set purchase shall entitle the refering individual with a free camber set. The buisness has to use your name as the refering individual and indicate which forum the referal originated. Only one set per buisness based on a minimum order.

[ruffino28]

i wanna get a set

[KenzBenz]

good price, i might need a set mrp

[jnolte]

yup i may need one too

[martattack]

Going to get H&R Springs on Bilstein sport shocks very soon, I will definitely be interested in those.

[black99]

I have monoblocks with 245/45-17's out back and they are wearing out really bad on the insides. Would these adjustable arms help me with that?

Gary

[martattack]

These arms adjust the camber of the rear suspension, so it will reduce the amount of tire wear on the inner edge.

[black99]

How difficult is the install?

Gary

[J Irwan]

Originally posted by black99
How difficult is the install?

Gary


if a pretty handy DIY'er it should be about 15min or less for each side.. (excluding taking of wheels) :D



Regardz,

[pierreS]

I'm installing my H&R springs in a month and I'm really interested in your kit. Let us know what to do to order it.
PS

[MRP Motorsports]

You can email me at

SALES@FASTCARINC.COM

Thx, MRP

[slowsupratt]

How many degrees of adjustments does it offer.

[MRP Motorsports]

Originally posted by slowsupratt
How many degrees of adjustments does it offer.

Nominally +3 degrees, but it will vary based on the overall height or lowering of the car.

[slowsupratt]

My car is slammed and i think there is more then 3 degrees of cmaber.

[JAY4]

Are these avail. yet?

[JAY4]

And one more question...Will these interfere with aftermarket swaybars? ie. H&R/Eibach?

[Ashkan's C280]

more importantly are they better than speedy benzs stuff

[Renn 208]

Originally posted by Ashkan's C280
more importantly are they better than speedy benzs stuff

This is a really old thread...and I believe MRP has disappeared into the ether...

[Ashkan's C280]

well I was searching through camber stuff before I made the buy and I found this, if he doesn't make the product then thats good to know

[speedybenz]

From others who have seen the MRP stuff, I guess it is not as rugged as the stuff I make and from everything I have heard he does not make MB parts anymore.

Jeff

[c280nz]

those arms looked good and cheap.
but wouldnt be as strong as your ones (and the ones i built)
i wouldnt think.
I like the standard rubber mounting idea tho.

[Ashkan's C280]

c280nz you make parts too? pictures? yeah I just went ahead and bought your stuff jeff, I also left a message about the other stuff I would like derlin bushings end links and the sways and front strut maybe, let me know if you can remake the sways please

[c280nz]

i only built the ones in my car, not for sale. and thats all ive built so far
i was saying that i dont think they would be as strong as both speedy benz arms, is a easyer way to put it. cos his were bought with forged/cast end rose ball joints< and those looked welded from mrp. but that wouldnt be an issue, that was just a picky comment i made

these are the ones i built
http://www.club202.com/forums/showthread.php?s=&threadid=7263&perpage=15&pagenumber=2
no masterpeice but do the job asked of them

[sig425]

speedybenz has email at his website. you still makin parts?

[c55m8o]

Originally posted by sig425
speedybenz has email at his website. you still makin parts? Stop -- noone is allowed to order anything from him until I he gets his complete suspenion kit completed for me! ;) ;)
No distractions... :p [....I'm keeeedeeng]

[Ashkan's C280]

what does the complete suspension include? I am trying to get some sways derlin bushings and rear end links out of him, maybe a front strut if I am lucky.

[c55m8o]

Originally posted by Ashkan's C280
what does the complete suspension include? I am trying to get some sways derlin bushings and rear end links out of him, maybe a front strut if I am lucky. click here for my thread on it... (http://www.club202.com/forums/showthread.php?s=&threadid=5953)