Speedybenz Camber Arms For Sale- 5 Sets

[speedybenz]

Due to many requests over the last few weeks, I will have 5 sets of Camber arms for sale by the end of next week. They fit W202, W203, W210, W208 and more.

They have been installed on several Club202 member cars for months now and are performing excellant.

The Rod Ends are very high quality Chromemoly steel with a Kevlar bearing race . The tubes are DOM steel with swedged ends and cadnium plated. The inserts are 303 stainless so they won't rust. All Camber Arms sets are made to order for each individual car. These arms add some precision to your rear suspension and do not make any noise.

If you want a set they are $260 shipped. I will add your name to the list as sets are paid for. Paypal # Kimdac@aol.com

Thanks, Jeff

1.
2.
3.
4.
5.

http://www.joeyandmona.com/albums/speedybenz-c43/DSC00639.sized.jpg

http://www.joeyandmona.com/albums/speedybenz-c43/DSC00643.sized.jpg

[lenwood]

how will my 98 c43 benefit from these arms? thanks

[jnolte]

Originally posted by lenwood
how will my 98 c43 benefit from these arms? thanks


If ur lowered and u got Neg camber u can change it so ur rear tires dont wear as much

[speedybenz]

lenwood,

The camber arms will save your rear tires from wearing on the inside due to excessive negative camber.

Or if your are like me they allow you to set the camber at exactly the best negative camber to achieve the best handling from your car.

Also since the camber arms use very high quality spherical bearings there is almost no friction during the suspension movement so the suspension reacts quicker and allows for better control over bumps.

Jeff

[lenwood]

will they perform well on a stock suspension set up?

[speedybenz]

lenwood,

Yes, they will perform great on a stock suspension setup. Most if not all the people running these on there current MB's have either stock or HR/Eibach lowered cars.

Jeff

[1SIKBNZ]

Hey jeff, would these still be able to function/correct camber with the addition of airbag suspension? also if i were to drive up to sac to pick them up any chance of help with the install of them? cost if any? thanks!

[speedybenz]

1SIKBNZ,

Yes the Camber Arms will fit on your C220. If you want me to install them I can. But it is going to cost you equal time in labor, such as waxing my car while I work on yours.

Let me know if your interested.

Jeff

[manny]

Originally posted by speedybenz
1SIKBNZ,

But it is going to cost you equal time in labor, such as waxing my car while I work on yours.
Jeff

14 hours to install 2 camber arms ? :D

[Brabus]

Jeff,

I actually might need a set of those... my camber is bad but I'm not too sure how it's affecting my tyres... I gotta take them off to see the wear on the inside. In any case I'll let you know.

My rear suspension seems to be a bit messed up anyways so we'll see :p

[speedybenz]

Just let me know Jeremy,

Tire wear seems to be a product of tire construction, air pressure and the camber and toe settings. I think you can have a couple of these items slightly out of line and still have decent tire life, but if one of them is out by a big amount then it seems to kill tire life.
IMO?

So you amy not need to use the camber arms to still get good tire life.

Jeff

[JAY4]

Hey Speedy, will these arms interfere with aftermarket swaybars?(H&R/Eibach) What kind of swaybars do you use?

[speedybenz]

They will work with the aftermarket swaybars just fine with no interference. I use a rear swaybar that I made myself.

Jeff

[SLAMMED_C]

speedybenz: Im interested in a set of your rear camber arms for my 99 W202.
I need more negative camber for my rear.. having some slight rubbing problems and I think the neg camber would help out a bit(im going to roll and flare fenders also).. plus I wouldnt mind some extra sporty neg rear camber for the corners!!

[MrSpace]

I just bought 18s.

As soon as they are on the car I'll check if I need camber correction. But seeing as everybody has too much neg camber, I think I'll need some too!

Is the GB still active?

Etienne

[speedybenz]

There was never any group buy, I just had 5 sets that I had made that were ready to sell. I still have some sets avalible.

Just let me know if you want a set.

Jeff

[SLAMMED_C]

how much is a set?? I would like a pair please.

[kameraguy]

Originally posted by SLAMMED_C
how much is a set?? I would like a pair please.


"If you want a set they are $260 shipped. I will add your name to the list as sets are paid for. Paypal # Kimdac@aol.com"

:p

[SLAMMED_C]

thanks kameraguy!!... Speedybenz, you have paypal mail!

[speedybenz]

SLAMMED C, I got your email look for the arms in about 1 week.

Thanks,

Jeff

[714guy]

Originally posted by speedybenz
SLAMMED C, I got your email look for the arms in about 1 week.

Thanks,

Jeff

just wanted to remind you speedy he's from canada remember to declare a lower value as i think it was rocky who got taxed a lot. If you already knew than my bad.

[speedybenz]

Oh yea I remember. My hired help shipped the set to Rocky and I would fire her but she sleeps next to me. The words Bobett seem to come to mind. Not sure why.

Jeff

[SLAMMED_C]

SLAMMED C, I got your email look for the arms in about 1 week.
Thanks,
Jeff
Great.. thanks Speedy. Im lookin forward to seein them in the flesh.


just wanted to remind you speedy he's from canada remember to declare a lower value as i think it was rocky who got taxed a lot. If you already knew than my bad.
well thats not good.. damn taxes..they get u comin and goin. thanks for helpin me out!!

[nukblazi]

Jeff, do you still have sets available? I sent you an email a week ago or so.


Thomas

[MrSpace]

Originally posted by nukblazi
Jeff, do you still have sets available? I sent you an email a week ago or so.


Thomas

I hopw he has some, because I'm lowering my car tonight and if I have too much camber I'll get one.

Etienne

[e210benz]

speedybenz i left you a email yesterday........ i need one for w210, please...... thanks

[MrSpace]

How ca we measure camber?

I want to know how I'm negative

Etienne

[nukblazi]

an allignment shop is best, even sears will give you a print out with all of the numbers of your suspension settings. Just don't let them change anything.

[speedybenz]

To those who have Camber Arms coming they are going out this week. Sorry for the delay.

Jeff

I do have some arms left. You can email me at: speedyafm2@aol.com

Again I am a little slow on the responses because I am job searching and it takes most of my time. That should change soon.

Thanks for your consideration.

[SLAMMED_C]

Hey Speedy.. just wondering if the arms have been sent out.. its been a week I think since you posted last.. I still havent gotten anything.. then again what can ya expect from the postal service!!

[speedybenz]

Slammed C,

Your arms went out like Monday last week. I put a cost of $20 for the arms. You should have them anyday.

Jeff

[SLAMMED_C]

Great.. thanks Jeff.
Ross

[coolcarlskic43]

How much are the arms for a 98 c43 speedy? Do I need them with the eibach 1.2 drop settup? I have the 17" stck monoblocks

[kameraguy]

coolcarl, the camber arms should be the same $260 for your car. And you can benefit from them since your car is lowered. Any lowering will cause some change in camber. The lower the drop the more correction, but even a slight drop makes a geometry change.

Jeff, I might hit you up on a set next month when finances allow. Do you think you will have some more?

[SLAMMED_C]

Hey Jeff.. just wanted to let you know that I got the camber arms today (tuesday) they look really great man.. you should really be doing this professionally.. great quality and just a sick lookin piece.
thanks again man
Ross

[speedybenz]

Thanks Ross,

I just try to make enough sets to help people out with camber probs. and to help pay for some of my mods.

The sides with the "L" on them goes to the inside, FYI.

Jeff

[SLAMMED_C]

Thanks Ross,
I just try to make enough sets to help people out with camber probs. and to help pay for some of my mods.
The sides with the "L" on them goes to the inside, FYI.
Jeff

Well u do frigin nice work man.. look really high quality.
yes.. thanks for the FYI!!!.. I was wondering which side went where!!.
thanks again.

[josh k]

Are the arms still available? As soon as I replace my right steering knuckle, I'm going to want to buy a set of these, my -2.68° of rear camber is killing me.

[Recaro18]

jeff..if i buy a set from you, can you help me install it? i'll wash and wax your car...;)

let me know, thanks..

ricky

[hvmercy]

Originally posted by Recaro18
jeff..if i buy a set from you, can you help me install it? i'll wash and wax your car...;)

let me know, thanks..

ricky

I'll buy a set from you and while Ricky is washing and waxing your car I'll clean the inside. wadaya say?:p

[JRE320]

You guys are so cheap!!! :D :p ;) :cool:

[speedybenz]

I will have more sets this coming week 5/26/04.

If you really need help on the install I can help you out. No need to wax my car. You can polish my lugnuts though!!

Jeff

[coolcarlskic43]

Originally posted by speedybenz
I will have more sets this coming week 5/26/04.

If you really need help on the install I can help you out. No need to wax my car. You can polish my lugnuts though!!

Jeff heh heh ,you guys r crazy! Polish these! :p :D Hey I couldnt resist!
No but on a serious note ,how much neg camber are you allowed to have without having to chng the arms? I'll definitely purchase them,IF I need them.

[coolcarlskic43]

Are these just for the rear or do you have a kit for the front as well in case the drop throws my front off as well?

[speedybenz]

I seems that when camber in the rear gets up to -1.5 degree it starts to cause excessive wear to the inside of the tires.

Right now the only means I know to help reduce camber in the front is the factory camber adjustment bolts.

I keep threatening to make an adjustable front camber kit but have not gotten around to it yet.

Jeff

[SLAMMED_C]

Right now the only means I know to help reduce camber in the front is the factory camber adjustment bolts.
I keep threatening to make an adjustable front camber kit but have not gotten around to it yet.
Well stop threatening and get to it man!!.. I would be interested if you ever get around to making an adjustable front camber kit.

[delisi2322]

so speedy I have h&r springs with koni adjustable i am getting an alignment tomorrow Do i need the camber arms you offer or not thanks for your help

[Renn 208]

Originally posted by delisi2322
so speedy I have h&r springs with koni adjustable i am getting an alignment tomorrow Do i need the camber arms you offer or not thanks for your help

If you're happy with the results of your alignment tomorrow, and don't ever plan on deviating from that, then no. Otherwise, yes.

[kicker]

Originally posted by speedybenz
I will have more sets this coming week 5/26/04.

If you really need help on the install I can help you out. No need to wax my car. You can polish my lugnuts though!!

Jeff

SpeedyBenz, keep up the good work, can't wait to get those camber arms. Hopefully I can have them by this weekend , but if it requires more time that's ok too! Thanks for making those for all the members who needs them :)
let me know when shipped!
thanks

[nukblazi]

Originally posted by speedybenz
I seems that when camber in the rear gets up to -1.5 degree it starts to cause excessive wear to the inside of the tires.

Right now the only means I know to help reduce camber in the front is the factory camber adjustment bolts.

I keep threatening to make an adjustable front camber kit but have not gotten around to it yet.

Jeff Set it to 1.5 for street, then set it from -3.0 for the track.

Jeff, while you are making threats, could you make me a set of front endlinks? Rear endlinks? And if you really are in the mood, front camber plates?


Thomas

[delisi2322]

hey speedy email me if you can about those camber arms or call at 847 5531721 thanks

[C43]

Before I send Payment. Do you still have some? I did the search on phelynic spacers and how you modified them. I am still foggy on the details.
Thanks

[speedybenz]

C43, I have one set of Cambers Arms left out of the last batch. They are sitting on my bench ready to go for a C43.

The next batch of Camber Arms will not be ready for a couple of weeks.

Jeff