Washer tank is leaking. Any easy fix?

[indo1]

Hi guys,

I heard this is a common problem with W202 model, Is that true?, My washer tank is leaking and I have not take it out and take a look at the tank. I just want to double check if I should buy a new tank or maybe you guys have any advise to fix this.

Thanks for the input

[1SIKBNZ]

If you cant duck it fuck it. lol jk.... *shrug* depends on how big the leak is.....

[davis449]

I'm with ^, I would duct tape it if it isn't a big leak.

[1SIKBNZ]

oops *duct lol...yeah or go with silicone to seal it up....

[vas2vas]

you can go to almost any parts store and they sell special resin kits with carbon fiber cloth to seal washer tank leaks...

[indo1]

I will take the damn thing out tomorrow and seal it:D

[SLAMMED_C]

it depends where your leak is.. it may be leaking from the rubber grommet that the pump goes thru.. or ur tank could be leaking.. easy fix for the a leaking tank it to seal it with some silicone or something.. if its leaking from the grommet.. replace the grommet.

[indo1]

Thanks for the reply. I replaced the O-ring plastic seal AKA Grommet, and it stopped leaking..Easy and cheap fix:D

[fastmayte]

cheap easy fix = duct tape or glue :banana:

[indo1]

cheap easy fix = duct tape or glue

nothing cheaper than the grommet itself = .85 cents:banana: :D

[fastmayte]

damn, that is cheap, haven't walked out the mb dealer without a few hundred bucks spent yet. lol.

[Tom Q]

So there is such a thing as .85 cents for an MB part :D

[sph17]

and also silicone cemented cuts/cracks in the plastic it self.