PDA

View Full Version : help on rear tire size



marksbenz
04-16-2004, 05:48 PM
I want to put 245/40/18s on the rear. I have a 18x8 Carlssons. Is this set up good or it will rub on the rear? Pls help. Thanks.:)

kameraguy
04-16-2004, 06:08 PM
The width should be fine. I had a 245/40/18 on my first set of rims for the rear and didn't rub. But the speed was off. You may lose cruise control too, so keep that in mind. A 35 profile is recommended to be safe.

What offset btw? That can help the wheel gurus know if it will rub.

marksbenz
04-16-2004, 08:30 PM
Sorry the offset 35mm

kameraguy
04-16-2004, 09:25 PM
ET 35 should be fine. My previous wheels were also ET 35, but 8.5 width.

Oh, I forgot that my fenders were already rolled. You *may* have to do this as well. It might be close and only rub when you have a lot of people in your car though. Mine only rubbed slightly on occasion (hitting a bump) when I had a full car and trunk. But maybe .5 narrower is a big diff in your case.

marksbenz
04-17-2004, 06:20 AM
Thanks Kam for your help. Hows the rc cars?