PDA

View Full Version : People with 19's and lowered


1SIKBNZ
06-14-2004, 11:35 AM
just curious how much turning radius you lost out on running the 19's and lowering your 202.... thanks!
Kswiss
06-14-2004, 11:40 AM
I can make full U-turns....i just do it slowly ...no rubbing...
alhacker
06-14-2004, 12:21 PM
very slowly.... ;)
edub
06-14-2004, 02:31 PM
still can do U turn ... very very slowly... :)
Kswiss
06-14-2004, 07:05 PM
what suspension setup you guys w/ 19's using?...i was thinking about going h&r sports with bilstein sports but was imagining that would be too low...what do you think?
SLAMMED_C
06-14-2004, 07:10 PM
No problem with turning, just have to do it slowly.. as everyone else said!!
dowe21
06-27-2004, 07:07 AM
Originally posted by Kswiss
what suspension setup you guys w/ 19's using?...i was thinking about going h&r sports with bilstein sports but was imagining that would be too low...what do you think?

just standard shocks with H&R springs (re compresed instead of cutting coil) and #1 pads all around plus 19" Lorrinser D93 :)

here is the pic

http://www.vibrahost.com/imagehost/uploads/G 4.JPG
Kswiss
06-27-2004, 12:30 PM
you have a picture of your back tires?
dowe21
06-27-2004, 02:40 PM
Originally posted by Kswiss
you have a picture of your back tires?

i have all the pics in the members galery under heading (gandhoz w202) by dowe 21 or if you want the focus one i will post another one :)
1SIKBNZ
06-27-2004, 05:03 PM
dowe: nice ride fist off! yeah thats how i want mine to sit..now you say recompressed why would you do that? age? also anyone know is voghtland lower than h&r? from what ive seen it looks liek it..they say 1.5 inch what is hr and eibach? thanks!
dowe21
06-27-2004, 05:49 PM
Originally posted by 1SIKBNZ
dowe: nice ride fist off! yeah thats how i want mine to sit..now you say recompressed why would you do that? age? also anyone know is voghtland lower than h&r? from what ive seen it looks liek it..they say 1.5 inch what is hr and eibach? thanks!

the thing is in Australia if you cut your springs is illegal so no one will cut it, even you cut it by your self and no one will install them (coz i cant replace the springs by my self) :)

so my springs are re compresed by someone who work in suspension company, basicly they heat the springs and compress it into possible lowest position. (this is the way they do it in australia instead of cutting)

i think h&r is 1.25" (correct me if im wrong)