PDA

View Full Version : Part numbers needed for Side skirt clips



dwang
06-05-2003, 11:20 AM
I removed my side skirts from a 1999 C230K sport yesterday and in the process broke some clips. I broke 4 of the 6 white plastic clips that hold the skirt from the top. Also, I broke all 3 small plastic clips in the front of the SS, the one that hold the little rubber strip above the SS in front of the door. Lastly, I broke the single plastic clip in the rear of the SS holding the rear rubber strip above the SS. All the bottom metal clips were fine. Any help would be appreciated.


A word of caution if you want to remove the side skirt. Be very very very very careful. These plastic clips are so brittle and break very easily!!



Dave

JRE320
06-05-2003, 12:26 PM
;)

SLK Boy
06-05-2003, 12:27 PM
So, you gonna let me borrow those side skirts? ;) j/k...hehe..are you finally putting the new kit on?

dwang
06-05-2003, 12:37 PM
Originally posted by JRE320
Plastic that hold your ss on top, is it round in shape or a flat rectangular head?

Rectagular in shape at the head where it clips to the side skirt. And then there's a protrusion that clips onto the car side. It's really hard to describe.


Originally posted by ExSLKBoy
So, you gonna let me borrow those side skirts? ;) j/k...hehe..are you finally putting the new kit on?

I was just testing the fit. The FG Carlsson replica kit doesn't fit too well onto the car and it is only held on by the 2 screws on the bottom of the car, not too sturdy. I might try and make the same exact cutouts as on the OEM SS so that I can use the OEM clips on the bottom side of the SS. I also need to sand down certain area of the SS. Some areas fit too tight as it is too thick. This project is taking waaaay to looooong!


Dave

JRE320
06-05-2003, 12:42 PM
I'll take some pics of the plastic you looking for and let us know w/c one you needed. I'll post it in a bit.

dwang
06-05-2003, 12:50 PM
Thanks Jun!

SLKBoy, your car would look pretty silly if you had black side skirts!!! Rice boy style!!!



Dave

JRE320
06-05-2003, 01:25 PM
http://ourworld.cs.com/JRE320/clips.jpg

Here's a partial pic. My battery need recharging so I'll post some more later. ;) you can see the back ground with some pics that's what I was trying to post so u can just pin point w/c one you needed.

Hey!!! you guys you need to check the mod. forum. you are also needed there.

dwang
06-06-2003, 08:26 PM
Those clips do not look like any of the ones I need. Jun, what year is your 202?


Dave

JRE320
06-06-2003, 10:46 PM
Uummmmmm.... I think I know what u looking for. My 202 is a 95.

dwang
06-10-2003, 12:19 PM
I got the part numbers, courtesy of the Euro Parts Pimp!! :D

Apparently, these clips were only designed for one time use. So there is no way to release them without breaking them...


Here are the part numbers:

pins at front wing (3 per side): A 009 988 39 78
clamps to go with these pins: A 009 988 40 78

clamps at top side of skirts (9 per side): A 009 988 41 78

pins at bottom of skirts: A 009 988 42 78
clamps to go with these pins: A 009 988 43 78
wateroutlet/clamp at bottom of skirt (1 per side): A 002 997 79 86

clamp at rear wing (1 per side): A 009 988 44 78

rear wing rubber left: A 202 698 45 30
rear wing rubber right: A 202 698 46 30
front wing rubber left: A 202 698 41 30
front wing rubber right: A 202 698 42 30


Dave

MBenzNL
06-11-2003, 12:23 AM
hehe, looks familair...

greetingz,

JRE320
06-11-2003, 12:27 AM
Originally posted by dwang
I got the part numbers, courtesy of the Euro Parts Pimp!! :D

Apparently, these clips were only designed for one time use. So there is no way to release them without breaking them...


Here are the part numbers:

pins at front wing (3 per side): A 009 988 39 78
clamps to go with these pins: A 009 988 40 78

clamps at top side of skirts (9 per side): A 009 988 41 78

pins at bottom of skirts: A 009 988 42 78
clamps to go with these pins: A 009 988 43 78
wateroutlet/clamp at bottom of skirt (1 per side): A 002 997 79 86

clamp at rear wing (1 per side): A 009 988 44 78

rear wing rubber left: A 202 698 45 30
rear wing rubber right: A 202 698 46 30
front wing rubber left: A 202 698 41 30
front wing rubber right: A 202 698 42 30


Dave

All of the above clips and clamps would only apply to OEM side skirts or it can also gon on the after market ones? :confused: :rolleyes: ;)

dwang
06-11-2003, 03:45 AM
Jun, OEM only. All of the aftermarket (save for AMG) skirts I have seen, do not have the cutouts where the OEM clips go. Most of them are held onto the car by a couple of screws (yikes!!)


Dave

SLK Boy
06-11-2003, 06:03 AM
Hey, lower black sideskirts would look like...well, my car stock! muhahaha...