PDA

View Full Version : Part # for glovebox lid



Luwin1026
06-09-2003, 09:41 AM
My glovebox latch is broken, and I was wondering if anyone can help provide a diagram with part numbers as to what I'll need to remedy this problem.

The dealership said that there's an inside piece ($75) and an outside piece ($175). Please say it ain't so!!! :(

SLK Boy
06-09-2003, 11:34 AM
Sorry, i don't have the part number..but if you tell me how to take it apart i'll get it for you...i tried to take it apart, but i can't get the inside part out for some reason...i took out the clips, but it keeps getting stuck. :(

JRE320
06-09-2003, 12:22 PM
Lu! do you need the whole assy or just the locking latch?
Coz there are 2 pcs w/c is like a liner then another with the light.
Or maybe you just need the one that holds the light?

Rocky
06-09-2003, 12:45 PM
Lu, duct tape is a man's best friend :D :D :D

Luwin1026
06-09-2003, 03:08 PM
Originally posted by JRE320
Lu! do you need the whole assy or just the locking latch?
Coz there are 2 pcs w/c is like a liner then another with the light.
Or maybe you just need the one that holds the light?

I'll take a closer look - but the latch in the middle is broken. (It's the one on the actual lid that has two clasps/claws that move away when you pull the handle on the left.

JRE320
06-09-2003, 06:10 PM
O'k Lu, to make it easier for all of us. You think you can pin point the part that you needed?

Luwin1026
06-09-2003, 09:30 PM
I think I need this part - because it's the latch on the door that's broken. :confused:

JRE320
06-10-2003, 01:05 AM
And here's your part number....
A 202 680 1098

Glove compartment lid and it's available at your nearest stealership for about $27.50. Is there anything else I could
help you with? ;) :cool: :)

Luwin1026
06-10-2003, 07:36 AM
Originally posted by JRE320
And here's your part number....
A 202 680 1098

Glove compartment lid and it's available at your nearest stealership for about $27.50. Is there anything else I could
help you with? ;) :cool: :)


Thanks, Jun - yeah, hook me up w/ some hot links and garlic bread - I'm hitting up the Bay next weekend. :D

JRE320
06-10-2003, 08:16 AM
Originally posted by Luwin1026
Thanks, Jun - yeah, hook me up w/ some hot links and garlic bread - I'm hitting up the Bay next weekend. :D

Next weekend? I'll probably be in L.A. next week myself. LOL!!!

CFB7000
02-14-2004, 04:47 PM
Hello People!!,

Maybe its due to the cold weather we've had over here in the Norht east, but all of a sudden, my glove box lid would not close!!. The latch that clasps the hook seems displaced, I have tried without success to open up the glove box lid itself.... Looks like a screw may have come undone.

Any suggestions on how to get the lid open... or am I better off getting a new lid????.

JRE320
02-14-2004, 04:54 PM
There's a pic of the glove box. Pin point the one that you needed then I'll tell you the part numbers.

CFB7000
02-15-2004, 10:25 AM
http://f1.pg.photos.yahoo.com/ph/cfb7000/album?.tok=phO1mpABpXGLxFL1&.dir=/59c9&.src=ph

Atached above is the link for the photo... I tried uploading it but no joy.... thanks much. *CB*

http://f1.pg.photos.yahoo.com/ph/cfb7000/detail?.dir=/59c9&.dnm=3235.jpg

JRE320
02-19-2004, 10:45 PM
what model is your car?

CFB7000
02-20-2004, 03:34 AM
Hello 'JRE'

Its a 1997 E320..... I made do with a temporary solution using a paper clip!!!...

*CB*

JRE320
02-20-2004, 09:12 AM
I can't see any part number for that part. I
think you got to get the whole assy for this one. Sorry... :(