PDA

View Full Version : Trunk, Shift Gate Light "Help"



ja2k
10-07-2004, 08:34 AM
Hello everyone I am having a problem with my shift gate light. I don't know if thats what its called. P D 3 etc, are not illuminated at night. Is there a bulb I have to change. Also the trunk light doesn't go on when I open the trunk. Oh yeah I have 94 c220. Thanks for your help

Jeff

ShollyC220
10-07-2004, 08:39 AM
I also have a '94 C220- i had this same problem last year when I installed a new zebrano shift knob. For a few days, the light didn't come on on the shift indicator, but after a while, the problem went away. H ow long has this been happening?

-sholly

nokia8860
10-07-2004, 08:43 AM
This is my experience with the older style gates which i think was carried over to the early 202s.

I believe the 94 uses the older style 124 shift gate. If so there is a buld that you have to changel It is behind the P N R D etc... so you must remove the assorted bits, trim panel, shift gate etc... to change the buld.

As for your trunk have you checked fuses,bulb,switch?

ja2k
10-07-2004, 09:57 AM
Originally posted by nokia8860
This is my experience with the older style gates which i think was carried over to the early 202s.

I believe the 94 uses the older style 124 shift gate. If so there is a buld that you have to changel It is behind the P N R D etc... so you must remove the assorted bits, trim panel, shift gate etc... to change the buld.

As for your trunk have you checked fuses,bulb,switch?

I will be checking the trunk in a bit thanks for your help nokia, I will be getting back to you soon.

ja2k
10-07-2004, 09:58 AM
Originally posted by ShollyC220
I also have a '94 C220- i had this same problem last year when I installed a new zebrano shift knob. For a few days, the light didn't come on on the shift indicator, but after a while, the problem went away. H ow long has this been happening?

-sholly

Its been like this for a while now. Thanks for your help

Rocket
10-08-2004, 08:29 AM
I just replaced mine last week on my 95 C36. It's super easy. Got the new light from the dealer ($4.00US - What a rip off!). Lift up your sifter cover and the light will be to the rear of the shifter once you take the rubber cubbyhole off.