Lumma Front bumper

[Pagz]

Hey has anyone got a Lumma front bumper here??....
iv got pics of the w202 wagon Lumma uses for advertising...
but i need a few more pics from different angles of the front...
Thanks...

Regards,
Paul

[c_lee]

here are the pics of the wagon version. who makes these?

i really don't the like the back

http://members.cox.net/c-lee/lumma.jpg

http://members.cox.net/c-lee/lumma1.jpg

[Pagz]

hey yeh those are the only pics i can find of this kit so far....
It'b be good to see what the front looks like on a few more rides.....

Regards,
Paul

[MrSpace]

hehe,

no one of you had seen this before?

you are not looking very hard on the net:-)

Altough I don't know anyone that installed it. And I'm pretty sure no one in the US has it.

Etienne

[Pagz]

Originally posted by MrSpace
hehe,

no one of you had seen this before?

you are not looking very hard on the net:-)

Altough I don't know anyone that installed it. And I'm pretty sure no one in the US has it.

Etienne
hey Etienne....
LOL....yeh iv had alittle look but never found that front before.....
iv mailed a few distributers but had no reply yet.....
it all seems to be in UK....
if you find some more pics let us know man...

Regards,
Paul

[IamJanuar]

looks like the rieger kit for audi and bmw
any website from them?

[boesewicht]

Hey guys.

Lumma is a german manufacturer for bodyparts. This company is about 20 minutes away from my house. I will get this frontbumper in two weeks, my car will be used for limo-advertising. The bumper on the photo is the prototype, it's not available yet. I get the first one out of the perfect production. I think it should be available in january or february 2005.
Will post pictures when it's fixed.

Alex.

[714guy]

i've never heard of this bumper for our W202, learn something new everyday.

The bumper looks hot except the holes might be too big, you'd need something to fill it in. Like an intercooler in the middle for sure, dont know about the side ones tho.

[MrSpace]

def. needs an intercooler

hey is it in ABS or fiberglass

because fiberglass is a big no-go for a bumper like this

and it really needs an intercooler

Etienne

[sleek_benzo]

i bet its going to be fiberglass.. would much rather have urethane..

[Brabus]

I have never heard of this bumper either and I thought I've been around the block :P

I'm interested in how much this costs and what the real production piece looks like...

[Pagz]

Originally posted by 714guy
i've never heard of this bumper for our W202, learn something new everyday.

The bumper looks hot except the holes might be too big, you'd need something to fill it in. Like an intercooler in the middle for sure, dont know about the side ones tho.

its almost perfect for my ride....the IC i have is about the size of the centre hole and the pipes will run through the outer holes....

Regards,
Paul

[Pagz]

Originally posted by boesewicht
Hey guys.

Lumma is a german manufacturer for bodyparts. This company is about 20 minutes away from my house. I will get this frontbumper in two weeks, my car will be used for limo-advertising. The bumper on the photo is the prototype, it's not available yet. I get the first one out of the perfect production. I think it should be available in january or february 2005.
Will post pictures when it's fixed.

Alex. Hey man no wonder i cant find anymore pics!!........I want this front bad....
look forward to see'n the pics.....

Regards,
Paul

[MrSpace]

wow, ok since I showed you that Lumma front (in the intake thread of the performance section)

have you seen the new rieger front?

I bet none of you had seen it before

Etienne

[Pagz]

hey yeh the Rieger front is alright......the duct in the front isnt really big enough for my IC......i really really need lumma front,
like a kid in a massive lolly shop lol....

Regards,
Paul

[J Irwan]

Although

this luma front is line up nicely than the new Reiger front bumper (on another thread) the air dam opening is way too big..

and all the bumper too squarish.. (I think the shape of the opening attribute to this as well).

While W202 is more boxy compare to W203, a nice body kit need to combine and blend the nice curve on the edges but also maintain some squarish pattern in between..


This one look way to square
look ridiculous.. !!


Plus the design is trying to imittate CLK-DTM front..

This is by MH-Dezent for W209 resemblance CLK-DTM
(This MH-Dezent look way better, and better suite CLK W209 body line, compliment the shape of the air dam opening as well)

Off course this might still be too aggressive to some ;)


http://www.mh-dezent.de/frames/images/CLK-Cabrio-m-b.jpg




Regardz,

[St0rMy]

It's not only Lumma who makes this front... Rieger also produces this front!
Here is the front that i'm gonna order this month :) Can't wait to get this installed.
http://home.no.net/stangis/fredrik/rieger_seite.jpg
http://home.no.net/stangis/fredrik/rieger_standlicht.jpg
This bumper also have "angeleyes" look like BMW's 5-series!!! :)

[MrSpace]

The Rieger is discussed here

http://www.club202.com/forums/showthread.php?s=&threadid=5596

and it seems noone likes it, but whatever floats your boat

I would get the Lumma wit a bigger IC way before the new Rieger.

Etienne

[Pagz]

Originally posted by MrSpace

I would get the Lumma wit a bigger IC way before the new Rieger.


second that man.....

[Denlasoul]

I think this front end would look good for you, 23K. I am not convinced about the sideskirts though. I would suggest sticking to something simple, like C36 skirts or something along those lines. I also dont like the back end, so that would probably be the hardest to match to the front. Good luck :)

[MrSpace]

I would put Lumma front with intercooler
C36 fake sideskirts and rieger rear

IMO that would be the best looking.

Fopr sure you need a big IC in order for the front to look good

Etienne

[mr. gatsbury]

I think this would be a cool front bumper

http://rds.yahoo.com/S=96062883/K=c280/v=2/SID=e/l=IVI/SIG=12fqjcll5/EXP=1105926839/*-http%3A//baztagfx.by.ru/bigimages/c280_redragon_2_opt_800.JPG

[MrSpace]

Originally posted by mr. gatsbury
I think this would be a cool front bumper

http://rds.yahoo.com/S=96062883/K=c280/v=2/SID=e/l=IVI/SIG=12fqjcll5/EXP=1105926839/*-http%3A//baztagfx.by.ru/bigimages/c280_redragon_2_opt_800.JPG

first time I see this

wow, nice IMO

Etienne

[mr. gatsbury]

Etienne,

Did you save that image by chance? It fell off the website I linked it from and I don't have it...

John

[Pagz]

yet another 202 bumper....who makes it?...Quick find the pic:)....

Regards,
Paul

[MrSpace]

did not save, but I'll check all my temp data maybe it's in there

there was a name on the front plate with probably the co. that makes the kit

Etienne

[MrSpace]

here you go

http://img119.exs.cx/img119/4268/c280redragon2opt80013wd.jpg

Etienne

[macaroni]

it's not a kit, it's from a 3D Modeller, the guy created it in a fancy schmancy thing, called a computer, dont get your hopes up :eek:

[MrSpace]

I tought it was modelled after a "real" car and he added the extras.

damn

I was all into fidning those front headlights with projectors and black housing!!! They are nice!

Etienne

[MrSpace]

http://www.3dm-mc.com/forum/showthread.php?t=2242

the guy has mad talent

I saw some CL600 parts he modelised on some russian forums and wow..

Etienne

[boesewicht]

Hey guys.

My Lumma frontbumper is painted, it'll get installed next thursday. Will have pics up on friday or monday.

Alex.

[Pagz]

Hey Alex,
Kewl man cant wait to see pics!!!.....
im so keen on getting this bumper!

Regards,
Paul

[Pagz]

hey any updates man??......It-is-tuesday!!:D :D :D

Regards,
Paul

[boesewicht]

Sorry, we had to much snow. Wasn't possible to get my car to Lumma last week. But now it's there (directly at Lumma Tuning) and I get it back today. So I hope to have pics soon.

Alex.

[albanianbenz]

So how much would this kit cost plus the shipping to USA

[boesewicht]

Guys, my baby is back!

Go to the members gallery here on club202 : "New member - Alex from Germany" and follow the link to my cardomain page.

Pics are not the best, but I hope to help you guys for your decisions..

And if you are a member on cardomain, please vote for me. :-)

Alex.

[Pagz]

Hey looks nice!!,
would be great if you could take a few higher res pics man!,
could you give me a contact for this bumper??

Regards,
Paul

[boesewicht]

Thank you very much 23K!

The weather is fuckin bad today here in germany. And I couldn't wait to take some pictures, I just made them when my baby was off the trailer. Will post some better pics soon.

And please check back, the new rieger sideskirts (the big ones) a custom made rearbumper, cf-hood and cf-wing will be installed soon.

Alex.

[boesewicht]

Oh...for contact just go to the site www.lumma-tuning.de and click on "Kontakt". There you'll find an e-mail adress.

Talked to Horst Lumma (the owner of Lumma Tuning) today when I fetched my car, but I forgot to ask if he sells that bumper to the united states.

Regular price for you is (on actual market value) 560$. That's the regular price here in germany. You have to add shipping, toll, insurance and packing costs. And I think some extra costs because the size of the package will be "bulk goods".

Alex.

[Flatsole]

Looks very Audi-ish, I like!

[Pagz]

hey man thanks for the link,
il find out wheather it is worth the effort.....
im not in the states though!,im in that little country in the middle of the pacific called New Zealand....so shipping/clearances costs is an issue lol.....

Regards,
Paul

[boesewicht]

Sorry, didn't understand the "kiwi signature"... :-)

To New Zealand you have to pay...1 Million $ I'd say. :-D

Alex.

[boesewicht]

Got new better pics up, so check it out. Follow the cardomain link in the member gallery here on club202. "New member - Alex from Germany".
And don't forget to vote for me. :-) Thanks.

Alex.

[gr8t1hex]

I found the importer for lumma tunning here in states. They don't stock parts for the w202 but they would order stuff for me if I was interested in it. I'm waiting for a call back to find out pricing on the bumber.

[Pagz]

Originally posted by boesewicht
Sorry, didn't understand the "kiwi signature"... :-)

To New Zealand you have to pay...1 Million $ I'd say. :-D

Alex.

yeh its not far off that either!!
our exchange is double your local currency....
so the bumper is $1100 already without shipping......that will cost around $600,and clearances around $250
thats one very expensive piece of fibre glass!!

I will win lotto this weekend anyway lol.....:p

Regards
Paul

[gr8t1hex]

okay I got a call back, the bumper is $599.00 + shipping in the U.S. and 6 to 8 weeks delivery wait.

[Pagz]

hey its cheaper for me to get it from US!!!:) Who is your contact there??

Regards,
Paul

[boesewicht]

I guess you guys like my pictures...? :)

[Pagz]

oh yeh.....i had a look....looks great!!!...personally i would paint the grill bumper mesh black to do away with the jap car look....but its very nice,im hoping i can get one too!!
oh an il give ya a vote:)

Regards,
Paul

[Brabus]

Originally posted by gr8t1hex
okay I got a call back, the bumper is $599.00 + shipping in the U.S. and 6 to 8 weeks delivery wait. Can you get me the info on this??

[gr8t1hex]

The name of the company is Strictly Foreign they are out of Allen town P.A. phone is 610- 391- 9586 talk to John.

[Brabus]

Thanks man... quick reply :p