CL rims on my C class?

[neema12]

Will the AMG CL wheels fit on my car, they are 19 by 9 with 35mm offset. They have a standard benz bolt pattern of 5/112. Also, will these 19s fit? Thx


Heres a pic of what they look like.

Link1 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43959&item=7944601143&rd=1&ssPageName=WDVW)

[pnsji]

the auctions is 19x8.5 and 9.5. It will fit but you will need about 10 mm spacers for both front and rear wheels.

if 19x9 ET35, it will not clear the front fender.

[neema12]

This setup is a 19/9 both front and rear with a offset of 35mm. Will these fit? I need to be sure before I buy them. Thx

[neema12]

Alright, the seller told me these rims are Amg style 19/9 both front and rear 35mm offset 5/112 mercedes bolt pattern, the condition is mint condition super clean. What do you think, will they fit, thx.

[Denlasoul]

Originally posted by pnsji
if 19x9 ET35, it will not clear the front fender.

[neema12]

I dont know what ET means, I have never bought rims before and this is a nOOb thing for me. I am guessing that ET is the offset, which is 35 on these wheels. Secondly, I know that these are 19 by 9" rims, so they will fit on the front and rear. When you say 9.5 will not clear, does that mean they will not rub or they wont fit at all. Also, what is the spacer used for? This is my first time buying rims, thx alot.

[pnsji]

neema, since you are newbie in this thing, take my word for granted. I said 19x9 will not clear the front fender. This means if you put it on your front wheels, the tires will BREAK your fender because it sticks out too much.

But if you don't want to read what I post carefully and keep doubting, you can go ahead and spend your money on something that will not fit your car :)

[FreeStyler]

19X9 will not fit in the front for sure....

[neema12]

ahhh... I got it now. So 8.5" are the max in the front, and 9" in the rear without rubbing? Thanks alot

[Jbizzyc43]

what kind of C class do you have? I have a '98 C43 dropped 1.4 in. and I put on some 19x8.5 front w/235/35/19 and 19x9.5 w/265/30/19 with an ET 37mm and it was only rubbing slightly on the left rear when I made sharp right turns. I shaved some of the side moulding that protruded into the fender well and that took care of the rubbing problem. The fronts cleared just fine. I think my stock wheel offset was ET 35mm. If my wheels were ET 35 mm, I think they would have worked out even better.

[neema12]

Yes, I remember reading your thread about how you fit these rims everyone else said you couldent. My car is a 95' c220.