air/fuel ratio help

[BangnBenz]

has anyone installed a air/fuel ratio gauge, Where do i tap the sensor wire too off of the 02 sensor.

[jnenad16]

the o2 sensor has 4 wires, 2 grey, 1black,1 white. if I remember correctly, the grey wires are for the o2 heater, and the black is constant and the white is the signal from the sensor, but like I said, I am not sure. check out www.boschusa.com and browse their oxygen sensor section to see if you can find any relevant info.

nenad

[CKlasse]

Check the wires w/ multimeter if you are unsure. You want the Hz readout.

[MrSpace]

can we get this from the OBD2 data?

because before installing high flow cats I need to see if my AF is ok afte rmy new FPR and pulley

Etienne

[RacerXofFL]

passangers floor carpet comes out seat all the way back, 4 wires, yellow wire...

be prepared to be disapointed.

[CKlasse]

yes, if you have Genesis or one alike, set the O2S reading at wide band.

[RacerXofFL]

I have a autometer, it works... but very uneventful, im gona replace my o2 sensor and report back.... I also chacked it with a DAS and it has the same readings as my autometer...

[CKlasse]

Originally posted by RacerXofFL
I have a autometer, it works... but very uneventful, im gona replace my o2 sensor and report back.... I also chacked it with a DAS and it has the same readings as my autometer...

Your car reminds me of my old one...

http://www.budsmuffler.com/ken/car.jpg

[RacerXofFL]

ok i REALLY need to talk to you, I dont know where u got the rieger stuff but in florida people say what?!?! so i brought mine into the us myself what a disaster..

The 1/4 page german directions SUCKED but their GLUES (WTF) worked amazingly well...

[CKlasse]

Hijacked! :D

Yes, the glue was great. I used some rivets and custom brackets to enforce the rear apron.

[RacerXofFL]

Yeah tread jackin is fun, my problems the SS's Im gona use cut to leinght pices of PVC pipe and stainless screws to fix em, just dont have the time, they flap in the breeze....